使用super-smack测试mysql的性能

我的环境是rhel5.1 server i386，mysql使用从www.mysql.com上下载的5.1.22的rpm包。super-smack使用的是1.2和1.3，两个版本差不多，编译的时候要把/usr/lib64目录下的libmysqlclient.so.16复制到/usr/lib目录下，而不是建立链接过去。super-smack 只能成功安装到32系统上，64位系统装不上。

使用下来感觉super-smack在我的rhel5u1 server i386+ mysql 5.1.22上运行会有很多错误，我不得不手工修改配置文件select-key.smack，不停的修改，不停的测试，终于成功运行。

修改后的select-key.smack，这个文件默认测试MyISAM引擎的性能：

[Copy to clipboard] [ - ]CODE: // this is will be used in the table section  这一段做了修改，主要是连mysql server：
client "admin"
{
user "smack";
host "192.168.20.7";
db "smack";
pass "smack";
socket "/var/lib/mysql/mysql.sock"; // this only applies to MySQL and is
// ignored for PostgreSQL
}

// ensure the table exists and meets the conditions
table "http_auth"
{
  client "admin"; // connect with this client
// if the table is not found or does not pass the checks, create it
// with the following, dropping the old one if needed
  create "create table http_auth
    (username char(25) not null primary key,
     pass char(25),
     uid integer not null,
     gid integer not null
    )";
  min_rows "90000"; // the table must have at least that many rows
  data_file "http_auth.dat"; // if the table is empty, load the data from this file
// 原本data_file的值是words.dat，后来改成smack库里与http_auth同名的http_auth.dat文件，程序才能正常运行。（详细说明在文档尾部）
  gen_data_file "gen-data -n 90000 -f %12-12s%n,%25-25s,%n,%d";
// gen-data命令后面的字段是以逗号分隔，但是mysqlimport不支持以逗号分隔的文件，必须以Tab分隔，所以生成这个文件以后把所有逗号替换成TAB。（注：直接在上面的命令中把逗号替换成TAB是无效的）。
// if the file above does not exist, generate it with the above shell command
// you can replace this command with anything that prints comma-delimited
// data to stdout, just make sure you have the right number of columns
}

//define a dictionary
dictionary "word"
{
  type "rand"; // words are retrieved in random order
  source_type "file"; // words come from a file
  source "http_auth.dat"; // file location  这里的文件名也相应做改动
  delim "    "; // take the part of the line before , //把逗号改为一个TAB
  file_size_equiv "45000"; // if the file is greater than this
//divive the real file size by this value obtaining N and take every Nth
//line skipping others. This is needed to be able to target a wide key
// range without using up too much memory with test keys
}

//define a query
query "select_by_username"
{
  query "select * from http_auth where username = '$word'";
// $word will be substitute with the read from the 'word' dictionary
  type "select_index";
// query stats will be grouped by type
  has_result_set "y";
// the query is expected to return a result set
  parsed "y";
// the query string should be first processed by super-smack to do
// dictionary substitution
}

// define database client type 不知道这一段是做什么的，把mysql server的连接信息填进去
client "smacker1"
{
user "smack"; // connect as this user
pass "smack"; // use this password
host "192.168.20.7"; // connect to this host
db "smack"; // switch to this database
socket "/var/lib/mysql/mysql.sock"; // this only applies to MySQL and is
// ignored for PostgreSQL
query_barrel "2 select_by_username"; // on each round,
// run select_by_username query 2 times
}

main
{
  smacker1.init(); // initialize the client
  smacker1.set_num_rounds($2); // second arg on the command line defines
// the number of rounds for each client
  smacker1.create_threads($1);
// first argument on the command line defines how many client instances
// to fork. Anything after this will be done once for each client until
// you collect the threads
  smacker1.connect();
// you must connect after you fork
  smacker1.unload_query_barrel(); // for each client fire the query barrel
// it will now do the number of rounds specified by set_num_rounds()
// on each round, query_barrel of the client is executed

  smacker1.collect_threads();
// the master thread waits for the children, each child reports the stats
// the stats are printed
  smacker1.disconnect();
// the children now disconnect and exit
}
执行测试命令：
super-smack -d mysql select-key.smack 10 1000

系统输出：

[Copy to clipboard] [ - ]CODE: super-smack -d mysql select-key.smack 10 1000
Table 'http_auth' does not meet condtions, will be dropped
Creating table 'http_auth'
Loading data from file '/var/smack-data/http_auth.dat' into table 'http_auth'
Error running query load data infile '/var/smack-data/http_auth.dat' into table http_auth fields terminated by ',':Can't get stat of '/var/smack-data/http_auth.dat' (Errcode: 2)
super-smack: aborting on failed query
http_auth.dat文件为空，数据没有导入成功，手工导入数据：
gen-data -n 90000 -f %12-12s%n,%25-25s,%n,%d > /var/smack-data/http_auth.dat

把开文本编辑器，把这个文件中的所有逗号替换为TAB，在vi里使用命令：
:%s/,/\t/g

再次运行测试命令，虽然我已经把配置文件中的delim变量的值改为TAB，但是下面的出错信息中仍然说字段分隔符是','，并且http_auth表没有数据：

[Copy to clipboard] [ - ]CODE: Table 'http_auth' does not meet condtions, will be dropped
Creating table 'http_auth'
Loading data from file '/var/smack-data/http_auth.dat' into table 'http_auth'
Error running query load data infile '/var/smack-data/http_auth.dat' into table http_auth fields terminated by ',':Can't get stat of '/var/smack-data/http_auth.dat' (Errcode: 2)
super-smack: aborting on failed query
[code]
通过手工导入：
mysqlimport -L -usmack -psmack -h192.168.20.7 smack /var/smack-data/http_auth.dat

系统输出说明数据已经导入：
smack.http_auth: Records: 90000  Deleted: 0  Skipped: 0  Warnings: 0

再次运行select测试命令：
super-smack -d mysql select-key.smack 10 1000

系统输出：
[code]
Query Barrel Report for client smacker1
connect: max=112ms  min=14ms avg= 59ms from 10 clients
Query_type      num_queries     max_time        min_time        q_per_s
select_index    20000   5       0       1967.19
运行update测试命令：
super-smack -d mysql update-select.smack 10 1000

系统输出：

[Copy to clipboard] [ - ]CODE: Query Barrel Report for client smacker
connect: max=137ms  min=17ms avg= 76ms from 10 clients
Query_type      num_queries     max_time        min_time        q_per_s
select_index    10000   6       1       932.57
update_index    10000   7       0       932.57
注：多次测试后发现每次输出的值都会不一样。


在mysql 集群上测试select的性能：
在配置文件中的建表语句中加入“engine ndb“，然后运行select测试语句，系统输出：

[Copy to clipboard] [ - ]CODE: Query Barrel Report for client smacker1
connect: max=600ms  min=20ms avg= 262ms from 10 clients
Query_type      num_queries     max_time        min_time        q_per_s
select_index    20000   12      2       650.54
运行update测试语句，系统输出：

[Copy to clipboard] [ - ]CODE: Query Barrel Report for client smacker
connect: max=117ms  min=15ms avg= 75ms from 10 clients
Query_type      num_queries     max_time        min_time        q_per_s
select_index    10000   17      3       291.17
update_index    10000   42      3       291.17
====================================================================================================
1. 关于data_file变量的设置：
经过研究发现super-smack先生成一个文件文件，文件名是由data_file变量指定，再把这个文件内容导入smack库的http_auth表，这个变量原来的值是words.dat，我试着手工导入文件：
mysqlimport -L -usmack -psmack -h192.168.20.7 smack /var/smack-data/words.dat

然后系统会提示找不到smack.words表，也就是smack库下的words表。mysqlimport导入文件的时候把文件扩展名去掉，把文件名剩下的部分做为表名导入数据，实际上smack库里没有words这个表，所以我把这个变量的值改为http_auth.dat，然后再试着手工导入就一切 ok了：
mysqlimport -L -usmack -psmack -h192.168.20.7 smack /var/smack-data/http_auth.dat

2. 关于http_auth.dat文件：
mysqlimport导入的文件，字段间必须以tab分隔，逗号或空格都不可以。

原文转自：http://www.ltesting.net