模板
教程
环境
性能
功能
管理
几十个实用的PL/SQL(4)
发表于：2007-07-02来源：作者：点击数：
标签：
第四阶段 Q.编写一过程以接受用户输入的三个部门编号并显示其中两个部门编号的部门名称。 A. CREATE OR REPLACE PROCEDURE DeptName(no1 dept.deptno%TYPE,no2 dept.deptno%TYPE,no3 dept.deptno%TYPE) AS vflag NUMBER; vdeptno1 dept.deptno%TYPE; vdeptno
第四阶段
Q.编写一过程以接受用户输入的三个部门编号并显示其中两个部门编号的部门名称。
A.
CREATE OR REPLACE PROCEDURE DeptName(no1 dept.deptno%TYPE,no2 dept.deptno%TYPE,no3 dept.deptno%TYPE) AS
vflag NUMBER;
vdeptno1 dept.deptno%TYPE;
vdeptno2 dept.deptno%TYPE;
vdname1 dept.dname%TYPE;
vdname2 dept.dname%TYPE;
BEGIN
vflag:=TO_NUMBER(TO_CHAR(SYSDATE,@#SS@#));
IF (vflag>=1 AND vflag<=10) OR (vflag>=50 AND vflag<60) THEN
SELECT deptno,dname INTO vdeptno1,vdname1 FROM dept WHERE deptno=no1;
SELECT deptno,dname INTO vdeptno2,vdname2 FROM dept WHERE deptno=no2;
ELSIF (vflag>=11 AND vflag<=20) OR (vflag>=40 AND vflag<50) THEN
SELECT deptno,dname INTO vdeptno1,vdname1 FROM dept WHERE deptno=no1;
SELECT deptno,dname INTO vdeptno2,vdname2 FROM dept WHERE deptno=no3;
ELSE
SELECT deptno,dname INTO vdeptno1,vdname1 FROM dept WHERE deptno=no2;
SELECT deptno,dname INTO vdeptno2,vdname2 FROM dept WHERE deptno=no3;
END IF;
DBMS_OUTPUT.PUT_LINE(@#部门编号:@#||vdeptno1 ||@# @#||@#部门名称:@# ||vdname1);
DBMS_OUTPUT.PUT_LINE(@#部门编号:@#||vdeptno2 ||@# @#||@#部门名称:@# ||vdname2);
END;
/
EXECUTE DeptName(10,20,30);
Q.编写一过程以显示所指定雇员名的雇员部门名和位置。
A.
CREATE OR REPLACE PROCEDURE DeptMesg(pename emp.ename%TYPE,pdname OUT dept.dname%TYPE,ploc OUT dept.loc%TYPE) AS
BEGIN
SELECT dname,loc INTO pdname,ploc
FROM emp,dept
WHERE emp.deptno=dept.deptno AND emp.ename=pename;
END;
/
VARIABLE vdname VARCHAR2(14)
VARIABLE vloc VARCHAR2(13)
EXECUTE DeptMesg(@#SMITH@#,:vdname,:vloc);
PRINT vdname vloc;
Q.编写一个给特殊雇员加薪10%的过程，这之后，检查如果已经雇佣该雇员超过60个月，则给他额外加薪3000.
A.
CREATE OR REPLACE PROCEDURE Raise_Sal(no IN NUMBER) AS
vhiredate DATE;
vsal emp.sal%TYPE;
BEGIN
SELECT hiredate,sal INTO vhiredate,vsal FROM emp WHERE empno=no;
IF MONTHS_BETWEEN(SYSDATE,vhiredate)>60 THEN
vsal:=NVL(vsal,0)*1.1+3000;
ELSE
vsal:=NVL(vsal,0)*1.1;
END IF;
UPDATE emp SET sal=vsal WHERE empno=no;
END;
/
VARIABLE no NUMBER
BEGIN
:no:=7369;
END;
/
EXECUTE Raise_Sal(:no)
SELECT empno,ename,sal,comm,hiredate FROM emp WHERE empno=:no;
Q.编写一个函数以检查所指定雇员的薪水是否有效范围内。不同职位的薪水范围为：
Designation Raise
Clerk 1500-2500
Salesman 2501-3500
Analyst 3501-4500
Others 4501 and above.
如果薪水在此范围内，则显示消息“Salary is OK”，否则，更新薪水为该范围内的最水值。
A.
CREATE OR REPLACE FUNCTION Sal_Level(no emp.empno%TYPE) RETURN CHAR AS
vjob emp.job%TYPE;
vsal emp.sal%TYPE;
vmesg CHAR(50);
BEGIN
SELECT job,sal INTO vjob,vsal FROM emp WHERE empno=no;
IF vjob=@#CLERK@# THEN
IF vsal>=1500 AND vsal<=2500 THEN
vmesg:=@#Salary is OK.@#;
ELSE
vsal:=1500;
vmesg:=@#Have updated your salary to @#||TO_CHAR(vsal);
END IF;
ELSIF vjob=@#SALESMAN@# THEN
IF vsal>=2501 AND vsal<=3500 THEN
vmesg:=@#Salary is OK.@#;
ELSE
vsal:=2501;
vmesg:=@#Have updated your salary to @#||TO_CHAR(vsal);
END IF;
ELSIF vjob=@#ANALYST@# THEN
IF vsal>=3501 AND vsal<=4500 THEN
vmesg:=@#Salary is OK.@#;
ELSE
vsal:=3501;
vmesg:=@#Have updated your salary to @#||TO_CHAR(vsal);
END IF;
ELSE
IF vsal>=4501 THEN
vmesg:=@#Salary is OK.@#;
ELSE
vsal:=4501;
vmesg:=@#Have updated your salary to @#||TO_CHAR(vsal);
END IF;
END IF;
UPDATE emp SET sal=vsal WHERE empno=no;
RETURN vmesg;
END;
/
DECLARE
vmesg CHAR(50);
vempno emp.empno%TYPE;
BEGIN
vempno:=&empno;
vmesg:=Sal_Level(vempno);
DBMS_OUTPUT.PUT_LINE(vmesg);
END;
/
--SELECT empno,ename,sal,comm,hiredate FROM emp WHERE empno=:no;
Q.编写一个函数以显示该雇员在此组织中的工作天数。
A.
CREATE OR REPLACE FUNCTION Hire_Day(no emp.empno%TYPE) RETURN NUMBER AS
vhiredate emp.hiredate%TYPE;
vday NUMBER;
BEGIN
SELECT hiredate INTO vhiredate FROM emp WHERE empno=no;
vday:=CEIL(SYSDATE-vhiredate);
RETURN vday;
END;
/
DECLARE
vday NUMBER;
vempno emp.empno%TYPE;
BEGIN
vempno:=&empno;
vday:=Hire_Day(vempno);
DBMS_OUTPUT.PUT_LINE(vday);
END;
/
--SELECT empno,ename,sal,comm,hiredate FROM emp WHERE empno=:no;
