我的ppp.conf

#################################################################
# PPP  Sample Configuration File
# Originally written by Toshiharu OHNO
# Simplified 5/14/1999 by clearcase/" target="_blank" >cc">wself@cdrom.com
#
# See /usr/share/examples/ppp/ for some examples
#
# $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $
#################################################################

default:
 set log Phase tun command #ident user-ppp VERSION (built COMPILATIONDATE)
 set ifaddr 10.0.0.1/0 10.0.0.2/0
 # Ensure that "device" references the correct serial port
 # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
 #
adsl:
 set device PPPoE:rl0

 set speed sync
 set mru 1492
 set mtu 1492
 set dial #"ABORT BUSY ABORT NOsCARRIER TIMEOUT 5
           #"" AT OK-AT-OK ATE1Q0 OK dATDTT TIMEOUT 40 CONNECT"
 set timeout 180   # 3 minute idle timer (the default)
 enable dns   # request DNS info (for resolv.conf)
 set login
 set dial
 set authname YourID
 set authkey YourPass
 add default HISADDR
papchap:
 #
 # edit the next three lines and replace the items in caps with
 # the values which have been assigned by your ISP.
 #

 #set phone PHONE_NUM
 set authname YourID
 set authkey YourPass

 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 add default HISADDR   # Add a (sticky) default route
####################The End#########################

我是大学校园网，局域网接入，虚拟拨号

OS:FreeBSD 5.1

在windows2000下用EnterNet500

FB下手工拨号命令：

#ppp -ddial adsl[Enter]

如果需要开机自动拨号，编辑/etc/rc.conf文件

加入：

ppp_enable="YES"

ppp_mode="ddial"

ppp_profile="adsl"     //这里写adsl（包括上面手工命令中的adsl）是由于配置文件中的那个adsl，如果你写了其他的标志，就改成你的

原文转自：http://www.ltesting.net