THE METHOD OF AIX SYSTEM BOOT AND STOP_Unix系统

THE METHOD OF AIX SYSTEM BOOT AND STOP

发表于：2007-05-26来源：作者：点击数：标签：

THE METHOD OF AIX SYSTEM BOOT AND STOP When the power of host is running,according follow method to boot four RS6000s , FAST600 and LTO3580 type device. Ⅰ.Boot 1.Boot fiber switch . 2.Boot the power of the FAST600 and LTO3580. 3.Waiting f

THE METHOD OF AIX SYSTEM BOOT AND STOP

When the power of host is running,aclearcase/" target="_blank" >ccording follow method to boot four RS6000s , FAST600 and LTO3580 type device.

Ⅰ.Boot
   1.Boot fiber switch .
   2.Boot the power of the FAST600 and LTO3580.
   3.Waiting for after the light of data of FAST600 don't climp,boot the power of RS6000s ,sequence is :
    1)was01p > was01t;
    2)udb01p > udb01t.
   4.Boot the HACMP of udb01p and udb01t , enter [smitty clstart]

Start Cluster Services
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
                                                        [Entry Fields]
* Start now, on system restart or both                now                     +
Start Cluster Services on these nodes               [udb01p]                +
BROADCAST message at startup?                       false                   +
Startup Cluster Lock Services?                      false                   +
Startup Cluster Information Daemon?                 true                    +
Reacquire resources after forced down ?             false                   +

Enter=Do

To verify the HACMP boot success:
   1)clstat(/usr/sbin/cluster/clstat)
   or
   2)hacmp.out(tail -f /tmp/hacmp.out)
   and
   3)lspv (the status of datavg is active)
   4)lsvg -l datavg (the status of lv is open/syncd)

   5.boot the udb01p and udb01t on the DB2 Server.
   A.Use the shell to boot(Note:the DB2 Server of udb01p has been boot through HACMP)
     in root directory of udb01t(/) , enter #startshell_udb01t.sh

   B.Use the follow command to boot DB2 on udb01p.
     #su - gpcp
     $db2start
     $exit

     #su -galp
     $db2start
     $exit

     #su - gsip
     $db2start
     $exit

   C.Use the follow command to boot DB2 on udb01t
     #su - gpct
     $db2start
     $exit

     #su -galt
     $db2start
     $exit

     #su -gsit
     $db2start
     $exit
    6.Boot Http server and WebSphere service on was01p and was01t.
     A.Use shell to boot
     1)in the root directory of was01p(/) enter the command of "startshell_was01p.sh".
     2)in the root directory of was01t(/) enter the command of "startshell_was01t.sh"

     B.Use command to boot
     1)Enter the follow command on was01p:
       #/usr/IBMHttpServer/bin/apachectl start
       #/usr/WebSphere/DeploymentManager/bin/startManager.sh
       #/usr/WebSphere/AppServer/bin/startNode.sh
       #/usr/WebSphere/AppServer/bin/startServer.sh GALX
       #/usr/WebSphere/AppServer/bin/startServer.sh GPCX
       #/usr/WebSphere/AppServer/bin/startServer.sh GSIX

     2)Enter the follow command on was01t:
       #/usr/IBMHttpServer/bin/apachectl start
       #/usr/WebSphere/AppServer/bin/startNode.sh

Note:Follow the nodes don't boot all:

       #/usr/WebSphere/AppServer/bin/startServer.sh GALY
       #/usr/WebSphere/AppServer/bin/startServer.sh GPCY
       #/usr/WebSphere/AppServer/bin/startServer.sh GSIY

       #/usr/WebSphere/AppServer/bin/startServer.sh GAL1J4
       #/usr/WebSphere/AppServer/bin/startServer.sh GPC1J4
       #/usr/WebSphere/AppServer/bin/startServer.sh GSI1J4

       #/usr/WebSphere/AppServer/bin/startServer.sh GAL1J5
       #/usr/WebSphere/AppServer/bin/startServer.sh GPC1J5
       #/usr/WebSphere/AppServer/bin/startServer.sh GSI1J5

       #/usr/WebSphere/AppServer/bin/startServer.sh GAL1TR
       #/usr/WebSphere/AppServer/bin/startServer.sh GPC1TR
       #/usr/WebSphere/AppServer/bin/startServer.sh GSI1TR

      C.Use the console of GUI to boot

       http://10.249.200.15:14000/admin

When the power of UPS is not suffix ,use the follow the method to stop RS6000s,FAST600 and LTO3580.

Ⅱ.Shutdown
    1.Stop the WebSphere service on was01p and was01t.
    A.Use the shell to stop
    1)In the root directory of was01p(/) ,enter the command of stopshell_was01p.sh
    2)When the status of running of was01t doesn't know,the stop action need to acheived in the console of WebSphere.
    http://10.249.200.15:14000/admin
    Should stop GAL1J4,GAL1J5,GAL1TR,GPC1J4,GPC1J5,GPC1TR,GSI1J4,GSI1J5 and GSI1TR.

In the root directory(/) of was01t,enter the command of stopshell_was01t.
#./stopshell_waso1t.sh

    B.Use the command to stop
    1)Enter the follow command on was01p:
      #/usr/WebSphere/AppServer/bin/stopServer.sh GALX
      #/usr/WebSphere/AppServer/bin/stopServer.sh GPCX
      #/usr/WebSphere/AppServer/bin/stopServer.sh GSIX

      #/usr/WebSphere/AppServer/bin/stopNode.sh
      #/usr/WebSphere/AppServer/bin/stopManager.sh
      #/usr/WebSphere/Appserver/bin/apachectl stop

    2)Enter the follow command on was01t:
      #/usr/WebSphere/AppServer/bin/stopServer.sh GALY
      #/usr/WebSphere/AppServer/bin/stopServer.sh GPCY
      #/usr/WebSphere/Appserver/bin/stopServer.sh GSIY
      #/usr/WebSphere/AppServer/bin/stopServer.sh GSIY
      #/usr/WebSphere/AppServer/bin/stopServer.sh GAL1J4
      #/usr/WebSphere/AppServer/bin/stopServer.sh GPC1J4
      #/usr/WebSphere/AppServer/bin/stopServer.sh GSI1J4
      #/usr/WebSphere/AppServer/bin/stopServer.sh GAL1J5
      #/usr/WebSphere/AppServer/bin/stopServer.sh GPC1J5
      #/usr/WebSphere/AppServer/bin/stopServer.sh GSI1J5
      #/usr/WebSphere/AppServer/bin/stopServer.sh GAL1TR
      #/usr/WebSphere/AppServer/bin/stopServer.sh GPC1TR
      #/usr/WebSphere/AppServer/bin/stopServer.sh GSI1TR
      #/usr/WebSphere/AppServer/bin/stopNode.sh
      #/usr/IBMHttpServer/bin/apachectl stop

     2.Stop the DB2 Server on udb01p and udb01t
      A.Use the shell to stop:
      1)In the root directory of udb01p(/) use the command of stopshell_udb01p.sh.
      2)In the root directory of udb01t(/) use the command of stopshell_udb01t.sh.

     B.Use the command to stop:
     1)Use follow command on udb01p:
      #su - gpcp
      $db2 force application all
      $db2stop
      $exit

      #su - galp
      $db2 force application all
      $db2stop
      $exit

      #su - gsip
      $db2 force application all
      $db2stop
      $exit

    2)Use follow command on udb01t:
      #su - gpct
      $db2 force application all
      $db2stop
      $exit

      #su - galt
      $db2 force application all
      $db2stop
      $exit

      #su - gsit
      $db2 force application all
      $db2stop
      $exit

3.Shutdown the RS6000s.
Use the command of shutdown -F on was01p,was01t,udb01p,udb01t.

4.Power off FAST600 and tape device.

5.Power off fiber switch.

THE METHOD OF AIX SYSTEM BOOT AND STOP

When the power of host is running,according follow method to boot four RS6000s , FAST600 and LTO3580 type device.

Ⅰ.Boot
   1.Boot fiber switch .
   2.Boot the power of the FAST600 and LTO3580.
   3.Waiting for after the light of data of FAST600 don't climp,boot the power of RS6000s ,sequence is :
    1)was01p > was01t;
    2)udb01p > udb01t.
   4.Boot the HACMP of udb01p and udb01t , enter [smitty clstart]