模板
教程
环境
性能
功能
管理
WAS JOB
JOB ONE：WAS JOB
Steps:
1>http://10.249.200.15:14000/admin
2>login with no "User ID"
3>focus on +WAS01Network
-Servers
-Application Servers
.GALX was01p started
.GPCX was01p started
.GSIX was01p started
Note:If the applications of GALX ,GPCX or GSIX doesn't start,you need to start it with command line,then verify its status.
4>focus on +WAS01Network
-Applications
-Enterprise Applications
.GAL started
.GPC started
.GSI started
The step3 started ,step 4 have been started.
The follow shell will use to start AS:
Use command line to start AS:
1)on was01p:
#/usr/IBMHttpServer/bin/apachectl start
#/usr/WebSphere/DeploymentManager/bin/startManager.sh
#/usr/WebSphere/AppServer/bin/startNode.sh
#/usr/WebSphere/AppServer/bin/startServer.sh GALX
#/usr/WebSphere/AppServer/bin/startServer.sh GPCX
#/usr/WebSphere/AppServer/bin/startServer.sh GSIX
2)ON was01t:
#/usr/IBMHttpServer/bin/apachectl start
#/usr/WebSphere/AppServer/bin/startNode.sh
Follow the services don't need all start,only unit service need to start:
#/usr/WebSphere/AppServer/bin/startServer.sh GALY
#/usr/WebSphere/AppServer/bin/startServer.sh GPCY
#/usr/WebSphere/AppServer/bin/startServer.sh GSIY
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1TR
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1TR
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1TR
Daily job two:
on follow host,check the /tmp/sysmonitor/ folder,if there have any critical you should notice administrator:
10.249.200.11
10.249.200.12
10.249.200.15
10.249.200.16
the root user's passwd is *********
JOB ONE：WAS JOB
Steps:
1>http://10.249.200.15:14000/admin
2>login with no "User ID"
3>focus on +WAS01Network
-Servers
-Application Servers
.GALX was01p started
.GPCX was01p started
.GSIX was01p started
Note:If the applications of GALX ,GPCX or GSIX doesn't start,you need to start it with command line,then verify its status.
4>focus on +WAS01Network
-Applications
-Enterprise Applications
.GAL started
.GPC started
.GSI started
The step3 started ,step 4 have been started.
The follow shell will use to start AS:
Use command line to start AS:
1)on was01p:
#/usr/IBMHttpServer/bin/apachectl start
#/usr/WebSphere/DeploymentManager/bin/startManager.sh
#/usr/WebSphere/AppServer/bin/startNode.sh
#/usr/WebSphere/AppServer/bin/startServer.sh GALX
#/usr/WebSphere/AppServer/bin/startServer.sh GPCX
#/usr/WebSphere/AppServer/bin/startServer.sh GSIX
2)ON was01t:
#/usr/IBMHttpServer/bin/apachectl start
#/usr/WebSphere/AppServer/bin/startNode.sh
Follow the services don't need all start,only unit service need to start:
#/usr/WebSphere/AppServer/bin/startServer.sh GALY
#/usr/WebSphere/AppServer/bin/startServer.sh GPCY
#/usr/WebSphere/AppServer/bin/startServer.sh GSIY
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1J4
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1J5
#/usr/WebSphere/AppServer/bin/startServer.sh GAL1TR
#/usr/WebSphere/AppServer/bin/startServer.sh GPC1TR
#/usr/WebSphere/AppServer/bin/startServer.sh GSI1TR
Daily job two:
on follow host,check the /tmp/sysmonitor/ folder,if there have any critical you should notice administrator:
10.249.200.11
10.249.200.12
10.249.200.15
10.249.200.16
the root user's passwd is *********
