STK L700E 在AIX 5.2 netbackup 5.1 中的配置

最近在搞一个大的备份系统，安装了一台STK 700E ，备份服务器：RS6000 P615  ，采用VERITAS NETBACKUP 5.1  安装完成以后，找不到机械手。

处理过程：

 （1）      首先确认线路是否连接正常。在AIX上安装一个LEGATO软件，可以找到机械手，证明设备STK 没有问题。

 （2）     配置OVPASS

    
若要安装 ovpass 驱动程序，请输入下列命令：
/usr/openv/volmgr/bin/driver/install_ovpass

要确保在每次系统启动之后驱动程序设备文件都是可访问的，应将下列命令放入系统启
动脚本中：
/usr/openv/volmgr/bin/driver/mkdev_ovpass

删除 SCSI Passthru 驱动程序
要删除 ovpass 驱动程序，请输入以下命令：
/usr/openv/volmgr/bin/driver/remove_ovpass

./remove_ovpass
./install_ovpass

root@bk-server# lsdev -C -s scsi
hdisk0 Available 1S-08-00-4,0  16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-5,0  16 Bit LVD SCSI Disk Drive
lus    Available               Legato SCSI User Interface Release 6.1.4.Build.56
2
ses0   Available 1S-08-00-15,0 SCSI Enclosure Services Device

root@bk-server# lsdev -C -s fcp
ovpass0 Available 1c-08-02 VERITAS Media Changer
rmt0    Available 1c-08-02 LTO Ultrium Tape Drive (FCP)
rmt1    Available 1c-08-02 LTO Ultrium Tape Drive (FCP)
rmt2    Available 1c-08-02 LTO Ultrium Tape Drive (FCP)
rmt3    Available 1c-08-02 LTO Ultrium Tape Drive (FCP)

root@bk-server# odmget -q "name=ovpass0" CuAt

CuAt:
        name = "ovpass0"
        attribute = "scsi_id"
        value = "0x620e13"
        type = "R"
        generic = "DU"
        rep = "s"
        nls_index = 6

CuAt:
        name = "ovpass0"
        attribute = "lun_id"
        value = "0x0000000000000"
        type = "R"
        generic = "DU"
        rep = "s"
        nls_index = 7

root@bk-server# odmget -q "name=rmt0" CuAt

CuAt:
        name = "rmt0"
        attribute = "scsi_id"
        value = "0x620955"
        type = "R"
        generic = "DU"
        rep = "s"
        nls_index = 25

CuAt:
        name = "rmt0"
        attribute = "lun_id"
        value = "0x0"
        type = "R"
        generic = "DU"
        rep = "s"
        nls_index = 26

CuAt:
        name = "rmt0"
        attribute = "ww_name"
        value = "0x5005076313605ae3"
        type = "R"
        generic = "D"
        rep = "s"
        nls_index = 28

CuAt:
        name = "rmt0"
        attribute = "node_name"
        value = "0x5005076313205ae3"
        type = "R"
        generic = "D"
        rep = "s"
        nls_index = 34

CuAt:
        name = "rmt0"
        attribute = "devtype"
        value = "ULTRIUM-"
        type = "R"
        generic = "D"
        rep = "s"
        nls_index = 17

root@bk-server# lsdev -C -c adapter |grep -i SCSI
sisscsia0 Available 1S-08    PCI-X Dual Channel Ultra320 SCSI Adapter
root@bk-server#

查到SCSI ID 号：
root@bk-server# lsdev -C -s scsi
hdisk0 Available 1S-08-00-4,0  16 Bit LVD SCSI Disk Drive
hdisk1 Available 1S-08-00-5,0  16 Bit LVD SCSI Disk Drive
lus    Available               Legato SCSI User Interface Release 6.1.4.Build.56
2
ses0   Available 1S-08-00-15,0 SCSI Enclosure Services Device
root@bk-server#

mkdev -c media_changer -s fcp -t ovpass -w 0x620E13,0x0
mkdev -c media_changer -s fcp -t ovpass -p fscsi0  -w 0x620E13,0x0

(3)  配置完成以后，也找不到，呵呵，没有办法了？

（4） 打电话问veritas 了人。说要打补丁。

        没办法，打补丁，找到光盘：

   
 Veritas 补丁的安装方法：
 
 （1） 从补丁光盘中COPY 出：NB_51_2_M.rs6000.tar，NB_CLT_51_2_M.tar到 一个目录下：
 
   /usr/openv/patch
  
  (2)  然后再TAR开这两个文件。
    #tar xvf *rs6000.tar
    #tar xvf *CLT*.tar
   
  (3) 运行：
    # ./ Vrts_pack.install
   
    There are 2 packs available in /usr/openv/patch:
(* denotes installed pack)

        NB_51_2_M
        NB_CLT_51_2_M

 Enter pack name (or q) [q]:NB_51_2_M
 
 然后再按提示进行。
 

打完补丁，再找一下，OK了，，，，，，，，，，，，

   呵呵，原来也是这样的，，，，，，

原文转自：http://www.ltesting.net