rx系列怎样在EFI下通过LAN和ignite server安装HP-UX

发布: 2007-6-08 22:43 | 作者: seanhe | 来源: | 查看: 46次 | 进入软件测试论坛讨论

zhangr 回复于：2003-04-25 10:58:29

[quote:47cb8cffee="vofsky"]rx系列怎样在EFI下通过LAN和ignite server安装HP-UX[/quote:47cb8cffee]
EFI是啥呀？
偶的环境里就是在被安装的机器上：重启动，10秒内中断一下，键入命令
boot lan.192.168.10.20 install
然后就开始安装吧！（192.168.10.20是ignite server的地址）

当然前提是ignite server已经配置好了。指定的映像文件也已经配置到ignite server里才行。

vofsky 回复于：2003-04-25 20:30:29

楼上的兄弟谢谢你的回复不过你的方法只能用于PA-RISC上，在IA64上只能用EFI,类似PA-RISC的BCH，ignite server我都配好了，用rp系列的重装系统没有问题，但在RX系列上重装时，第一台就进行不下去，郁闷啊

gino 回复于：2003-06-06 11:16:40

Itanium&-based Client Network Booting Option

Step 1.  From the EFI Boot Manager menu, you will see a prompt to select a boot option. Select Boot option maintenance menu.
EFI Boot Manager ver 1.10 [14.54]  Firmware ver 0.0 [4209]

Please select a boot option

    EFI Shell [Built-in]
    Boot option maintenance menu
    Security/Password Menu (*** Prototype ***)

Use up and down-arrows to change option(s).
Use Enter to select an option

Step 2.  The Main Menu appears and prompts you to choose an operation. Select Add a Boot Option.
EFI Boot Maintenance Manager ver 1.10 [14.54]

Main Menu. Select an Operation

        Boot from a File
        Add a Boot Option
        Delete Boot Option(s)
        Change Boot Order

        Manage BootNext setting
        Set Auto Boot TimeOut

        Select Active Console Output Devices
        Select Active Console Input Devices
        Select Active Standard Error Devices

        Cold Reset
        Exit

Step 3.  The following menu displays. Select an appropriate .network card for network boot. For example, look for entries with a MAC followed by the Mac/LLA address of the LAN card.
EFI Boot Maintenance Manager ver 1.10 [14.54]

Add a Boot Option.  Select a Volume

    Removable Media Boot [Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Maste
    Load File [EFI Shell [Built-in]]
    Load File [Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E1E4ED4)]
    Load File [Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E1E3ED6)]
    Exit

Step 4.  Enter an appropriate boot option name at the message prompt. For this example, new boot options are named LAN1 and LAN2.
Step 5.  Exit to the main menu. The new boot option will now appear in the EFI Boot Manager main menu.
EFI Boot Manager ver 1.10 [14.54]  Firmware ver 0.0 [4209]

Please select a boot option

    SCSI2-HPUX
    EFI Shell [Built-in]
    LAN2
    LAN1
    Boot option maintenance menu
    Security/Password Menu (*** Prototype ***)

Use up and down-arrows to change option(s).
Use Enter to select an option

Step 6.  Select the new boot option you created. The following is an example of a successful boot using the new boot option.
Loading.: LAN1
Running LoadFile()

CLIENT IP: 15.1.52.128  MASK: 255.255.248.  DHCP IP: 15.1.53.37
GATEWAY IP: 15.1.48.1
Running LoadFile()

Starting: LAN1

@(#) HP-UX IA64 Network Bootstrap Program Revision 1.0
Downloading HPUX bootloader
Starting HPUX bootloader
Downloading file fpswa.efi  (371200 bytes)

(c) Copyright 1990-2001, Hewlett Packard Company.
All rights reserved

HP-UX Boot Loader for IA64  Revision 1.671

Booting from Lan
Downloading file AUTO   (528 bytes)
Press Any Key to interrupt Autoboot
AUTO ==> boot IINSTALL
Seconds left till autoboot -   0
AUTOBOOTING...