Use the Change Network Attributes ([b:6f642df8ea][size=24:6f642df8ea][color=red:6f642df8ea]CHGNETA[/color:6f642df8ea][/size:6f642df8ea][/b:6f642df8ea]) command to change the system name. The name can contain up to 8 alphanumeric characters. The name entered becomes the current system name at the next IPL. It is important to remember that the Local Control Point Name (LCLCPNAME) and Default Local Location Name (LCLLOCNAME) are used rather than the SYSNAME when setting up SNA communications with APPN. Take this into consideration when changing the SYSNAME, as the LCLCPNAME and LCLLOCNAME may also need to be changed.
[b:6f642df8ea]Note: This command requires *ALLOBJ authority.[/b:6f642df8ea]
| pcas400 回复于：2003-07-16 07:50:09 |
| 精华 |
延伸阅读
文章来源于领测软件测试网 https://www.ltesting.net/
