AIX 5.3 Installation Tips
AIX 5.3 Installation Tips
要在部分RS/6000机器上安装AIX5.3的兄弟们注意了。
--------------------------------------------------------------------------------
This document contains the latest tips for successful installation of AIX 5.3, and will be updated as new tips become available.
APARs and PTFs mentioned in this document, when available, can be obtained from the following web site.
http://www.ibm.com/servers/eserver/support/pseries/aixfixes.html
--------------------------------------------------------------------------------
The AIX installation CD-ROMs and the level of AIX pre-installed on new systems may not contain the latest fixes available at the time you install the system, and may contain errors. Some these fixes may be critical to the proper operation of your system. We recommend that you update to the latest service level, which can be obtained from http://www.ibm.com/servers/eserver/support/pseries/aixfixes.html.
The compare_report command, which is documented in the AIX Commands Reference, can be used to determine which available updates are newer than those installed on your system.
--------------------------------------------------------------------------------
Required Firmware Upgrade
--------------------------------------------------------------------------------
Required Firmware Upgrade
The following pSeries models require an upgrade to their firmware in order to install and run AIX 5L Version 5.3.
7025-F80
7025-6F0
7025-6F1
7026-H80
7026-6H0
7026-6H1
7026-M80
7026-6M1
NOTE: You must upgrade the system firmware before installing AIX 5L Version 5.3.
System System Level with Support of AIX 5.3
7025-F80/6F0/6F1 CL040712
7026-H80/6H0/6H1 CM040712
7026-M80/6M1 MM040712
The required version of firmware can be obtained from the following web site.
http://techsupport.services.ibm.com/server/mdownload
_________________
Critical Fixes for AIX 5.3
--------------------------------------------------------------------------------
APAR IY58143 for AIX 5.3 is required for system stability and performance and should be installed on all AIX 5.3 systems. To determine if APAR IY58143 is installed, use the following command:
instfix -ik IY58143
The output should indicate that all filesets for APAR IY58143 were found. To list all updates included in APAR IY58143 or determine which updates are not installed, use the command:
instfix -ivk IY58143
Critical Fix packages can be obtained from the following URL:
http://www.ibm.com/servers/eserver/support/pseries/aixfixes.html
文章来源于领测软件测试网 https://www.ltesting.net/