两台rp3440-4 server共享一个DS2405的盘柜,DS2405中一共有4块73GB的硬盘,c4t0d0 ,c4t1d0,c4t2d0,c4t3d0 ,其中两块硬盘在做pvcreate ,vgextend ,vgcreate等命令时总是出错。收集到如下信息:
lnnc_pm2[/]ioscan -kfnCdisk
Class I H/W Path Driver S/W State H/W Type Description
=========================================================================
disk 0 0/0/2/0.0.0.0 sdisk CLAIMED DEVICE TEAC DV-28E-C
/dev/dsk/c0t0d0 /dev/rdsk/c0t0d0
disk 1 0/1/1/0.0.0 sdisk CLAIMED DEVICE HP 36.4GMAU3036NC
/dev/dsk/c2t0d0 /dev/rdsk/c2t0d0
disk 2 0/1/1/0.1.0 sdisk CLAIMED DEVICE HP 36.4GST336754LC
/dev/dsk/c2t1d0 /dev/rdsk/c2t1d0
disk 5 0/4/1/0.8.0.255.0.2.0 sdisk CLAIMED DEVICE HP 73.4GST3
73307FC
/dev/dsk/c4t2d0 /dev/rdsk/c4t2d0
disk 6 0/4/1/0.8.0.255.0.3.0 sdisk CLAIMED DEVICE HP 73.4GST3
73307FC
/dev/dsk/c4t3d0 /dev/rdsk/c4t3d0
disk 7 0/4/1/0.8.0.255.0.4.0 sdisk CLAIMED DEVICE HP 73.4GST3
73307FC
/dev/dsk/c4t4d0 /dev/rdsk/c4t4d0
disk 8 0/4/1/0.8.0.255.0.5.0 sdisk CLAIMED DEVICE HP 73.4GST3
73307FC
/dev/dsk/c4t5d0 /dev/rdsk/c4t5d0
lnnc_pm2[/]diskinfo /dev/rdsk/c4t5d0
SCSI describe of /dev/rdsk/c4t5d0:
vendor: HP 73.4G
product id: ST373307FC
type: direct access
size: 140000000 Kbytes
bytes per sector: 520
lnnc_pm2[/]diskinfo /dev/rdsk/c4t4d0
SCSI describe of /dev/rdsk/c4t4d0:
vendor: HP 73.4G
product id: ST373307FC
type: direct access
size: 140000000 Kbytes
bytes per sector: 520
lnnc_pm2[/]diskinfo /dev/rdsk/c4t3d0
SCSI describe of /dev/rdsk/c4t3d0:
vendor: HP 73.4G
product id: ST373307FC
type: direct access
size: 71687369 Kbytes
bytes per sector: 512
lnnc_pm2[/]diskinfo /dev/rdsk/c4t2d0
SCSI describe of /dev/rdsk/c4t2d0:
vendor: HP 73.4G
product id: ST373307FC
type: direct access
size: 71687369 Kbytes
bytes per sector: 512
Need install CVSDM to run JBODfmt formatting disks to 512Byte/Sector
Here's what I followed to format the DS2405 drives:
1. Insert the drive in the DS2405 chassis
2. "discover" the drive
# ioscan -fnC disk
3. Create device files
# insf -e
4. Discover the DS2405 if not already "visible"
# armdiscover
5. To display DS2405 information
# JBODdsp -I
6. Format the drive - command line
# JBODfmt -f /dev/dsk/c8t4d0
-or- if already formatted
# JBODfmt -foverride /dev/dsk/c8t4d0
7. Format the drive using cvui
select drive number
select "Disk"
select "Format"
文章来源于领测软件测试网 https://www.ltesting.net/