• 软件测试技术
  • 软件测试博客
  • 软件测试视频
  • 开源软件测试技术
  • 软件测试论坛
  • 软件测试沙龙
  • 软件测试资料下载
  • 软件测试杂志
  • 软件测试人才招聘
    暂时没有公告

字号: | 推荐给好友 上一篇 | 下一篇

RFC1877 - PPP Internet Protocol Control Protocol Extensions for Name Server Addr

发布: 2007-6-23 14:09 | 作者:   | 来源:   | 查看: 30次 | 进入软件测试论坛讨论

领测软件测试网

   
  Network Working Group S. Cobb
Request for Comments: 1877 Microsoft
Category: Informational December 1995

PPP Internet Protocol Control Protocol Extensions for
Name Server Addresses

Status of this Memo

This memo provides information for the Internet community. This memo
does not specify an Internet standard of any kind. Distribution of
this memo is unlimited.

Abstract

The Point-to-Point Protocol (PPP) [1] provides a standard method for
transporting multi-protocol datagrams over point-to-point links. PPP
defines an extensible Link Control Protocol and a family of Network
Control Protocols (NCPs) for establishing and configuring different
network-layer protocols.

This document extends the NCP for establishing and configuring the
Internet Protocol over PPP [2], defining the negotiation of primary
and secondary Domain Name System (DNS) [3] and NetBIOS Name Server
(NBNS) [4] addresses.

Table of Contents

1. Additional IPCP Configuration options ................. 1
1.1 Primary DNS Server Address .................... 2
1.2 Primary NBNS Server Address ................... 3
1.3 Secondary DNS Server Address .................. 4
1.4 Secondary NBNS Server Address ................. 5
REFRENCES .................................................... 6
SECURITY CONSIDERATIONS ...................................... 6
CHAIR'S ADDRESS .............................................. 6
AUTHOR'S ADDRESS ............................................. 6

1. Additional IPCP Configuration Options

The four name server address configuration options, 129 to 132,
provide a method of obtaining the addresses of Domain Name System
(DNS) servers and (NetBIOS Name Server (NBNS) nodes on the remote
network.

Primary and secondary addresses are negotiated independently. They
serve identical purposes, except that when both are present an
attempt SHOULD be made to resolve names using the primary address
before using the secondary address.

For implementational convenience, these options are designed to be
identical in format and behavior to option 3 (IP-Address) which is
already present in most IPCP implementations.

Since the usefulness of name server address information is dependent
on the topology of the remote network and local peer's application,
it is suggested that these options not be included in the list of
"IPCP Recommended Options".

1.1. Primary DNS Server Address

Description

This Configuration Option defines a method for negotiating with
the remote peer the address of the primary DNS server to be used
on the local end of the link. If local peer requests an invalid
server address (which it will typically do intentionally) the
remote peer specifies the address by NAKing this option, and
returning the IP address of a valid DNS server.

By default, no primary DNS address is provided.

A summary of the Primary DNS Address Configuration Option format is
shown below. The fields are transmitted from left to right.

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Primary-DNS-Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Primary-DNS-Address (cont) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

129

Length

6

Primary-DNS-Address

The four octet Primary-DNS-Address is the address of the primary
DNS server to be used by the local peer. If all four octets are
set to zero, it indicates an explicit request that the peer
provide the address information in a Config-Nak packet.

Default

No address is provided.

1.2. Primary NBNS Server Address

Description

This Configuration Option defines a method for negotiating with
the remote peer the address of the primary NBNS server to be used
on the local end of the link. If local peer requests an invalid
server address (which it will typically do intentionally) the
remote peer specifies the address by NAKing this option, and
returning the IP address of a valid NBNS server.

By default, no primary NBNS address is provided.

A summary of the Primary NBNS Address Configuration Option format is
shown below. The fields are transmitted from left to right.

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Primary-NBNS-Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Primary-NBNS-Address (cont) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

130

Length

6

Primary-NBNS-Address

The four octet Primary-NBNS-Address is the address of the primary
NBNS server to be used by the local peer. If all four octets are
set to zero, it indicates an explicit request that the peer

provide the address information in a Config-Nak packet.

Default

No address is provided.

1.3. Secondary DNS Server Address

Description

This Configuration Option defines a method for negotiating with
the remote peer the address of the secondary DNS server to be used
on the local end of the link. If local peer requests an invalid
server address (which it will typically do intentionally) the
remote peer specifies the address by NAKing this option, and
returning the IP address of a valid DNS server.

By default, no secondary DNS address is provided.

A summary of the Secondary DNS Address Configuration Option format is
shown below. The fields are transmitted from left to right.

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Secondary-DNS-Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Secondary-DNS-Address (cont) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

131

Length

6

Secondary-DNS-Address

The four octet Secondary-DNS-Address is the address of the primary
NBNS server to be used by the local peer. If all four octets are
set to zero, it indicates an explicit request that the peer
provide the address information in a Config-Nak packet.

Default

No address is provided.

1.4. Secondary NBNS Server Address

Description

This Configuration Option defines a method for negotiating with
the remote peer the address of the secondary NBNS server to be
used on the local end of the link. If local peer requests an
invalid server address (which it will typically do intentionally)
the remote peer specifies the address by NAKing this option, and
returning the IP address of a valid NBNS server.

By default, no secondary NBNS address is provided.

A summary of the Secondary NBNS Address Configuration Option format
is shown below. The fields are transmitted from left to right.

0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Type | Length | Secondary-NBNS-Address
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Secondary-NBNS-Address (cont) |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Type

132

Length

6

Secondary-NBNS-Address

The four octet Secondary-NBNS-Address is the address of the
secondary NBNS server to be used by the local peer. If all
four octets are set to zero, it indicates an explicit request
that the peer provide the address information in a Config-Nak
packet.

Default

No address is provided.

References

[1] Simpson, W., Editor, "The Point-to-Point Protocol (PPP)", STD 51,
RFC1661, Daydreamer, July 1994.

[2] McGregor, G., "PPP Internet Control Protocol", RFC1332, Merit,
May 1992.

[3] Auerbach, K., and A. Aggarwal, "Protocol Standard for a NetBIOS
Service on a TCP/UDP Transport", STD 19, RFCs 1001 and 1002,
March 1987.

[4] Mockapetris, P., "Domain Names - Concepts and Facilities", STD
13, RFC1034, USC/Information Sciences Institute, November 1987.

[5] Mockapetris, P., "Domain Names - Implementation and
Specification", STD 13, RFC1035, USC/Information Sciences
Institute, November 1987.

Security Considerations

Security issues are not discussed in this memo.

Chair's Address

The working group can be contacted via the current chair:

Fred Baker
Cisco Systems
519 Lado Drive
Santa Barbara, California 93111

EMail: fred@cisco.com

Author's Address

Questions about this memo can also be directed to:

Steve Cobb
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399

Phone: (206) 882-8080

延伸阅读

文章来源于领测软件测试网 https://www.ltesting.net/


关于领测软件测试网 | 领测软件测试网合作伙伴 | 广告服务 | 投稿指南 | 联系我们 | 网站地图 | 友情链接
版权所有(C) 2003-2010 TestAge(领测软件测试网)|领测国际科技(北京)有限公司|软件测试工程师培训网 All Rights Reserved
北京市海淀区中关村南大街9号北京理工科技大厦1402室 京ICP备2023014753号-2
技术支持和业务联系:info@testage.com.cn 电话:010-51297073

软件测试 | 领测国际ISTQBISTQB官网TMMiTMMi认证国际软件测试工程师认证领测软件测试网