RFC861 - Telnet Extended Options: List Option

领测软件测试网

　　 
　　Network Working Group J. Postel
Request for Comments: 861 J. Reynolds
ISI
Obsoletes: NIC 16239 May 1983

TELNET EXTENDED OPTIONS - LIST OPTION

This RFCspecifies a standard for the ARPA Internet community. Hosts on

the ARPA Internet are expected to adopt and implement this standard.

1. Command Name and Code

EXTENDED-OPTIONS-LIST (EXOPL) 255

2. Command Meanings

IAC DO EXOPL

The sender of this command REQUESTS that the receiver of this
command begin negotiating, or confirms that the receiver of this
command is expected to begin negotiating, TELNET options which are
on the "Extended Options List".

IAC WILL EXOPL

The sender of this command requests permission to begin
negotiating, or confirms that it will begin negotiating, TELNET
options which are on the "Extended Options List".

IAC WON'T EXOPL

The sender of this command REFUSES to negotiate, or to continue
negotiating, options on the "Extended Options List".

IAC DON'T EXOPL

The sender of this command DEMANDS that the receiver conduct no
further negotiation of options on the "Extended Options List".

IAC SB EXOPL <subcommand>

The subcommand contains information required for the negotiation
of an option of the "Extended Options List". The format of the
subcommand is discussed in section 5 below.

3. Default

WON'T EXOPL, DON'T EXOPL

RFC861 May 1983

Negotiation of options on the "Extended Options List" is not
permitted.

4. Motivation for the Option

Eventually, a 257th TELNET option will be needed. This option will
extend the option list for another 256 options in a manner which is
easy to implement. The option is proposed now, rather than later
(probably much later), in order to reserve the option number (255).

5. An Abstract Description of the Option

The EXOPL option has five subcommand codes: WILL, WON'T, DO, DON'T,
and SB. They have exactly the same meanings as the TELNET commands
with the same names, and are used in exactly the same way. For
consistency, these subcommand codes will have the same values as the
TELNET command codes (250-254). Thus, the format for negotiating a
specific option on the "Extended Options List" (once both parties
have agreed to use it) is:

IAC SB EXOPL DO/DON'T/WILL/WON'T/<option code> IAC SE

Once both sides have agreed to use the specific option specified by
<option code>, subnegotiation may be required. In this case the
format to be used is:

IAC SB EXOPL SB <option code> <parameters> SE IAC SE

文章来源于领测软件测试网 https://www.ltesting.net/