4800上PROBE 可以显示出找到光驱，也SET-DEFAULTS过，但BOOT CDROM 显示CAN'T OPEN BOOT-DEVICE，请问在4800上CDROM的物理别名是什么？
| Bass3r 回复于：2003-09-28 21:37:24 |
| 不好意思，估计是我的SCSI 卡坏了 |
| race 回复于：2003-09-28 21:43:16 |
| 换8的盘能起来吗？ |
| Bass3r 回复于：2003-09-28 22:01:09 |
| [quote:d68950b07a="race"]换8的盘能起来吗？[/quote:d68950b07a]
也不行，我换了一块SCSI卡，可以BOOT了，但到了一半显示以下报错信息： {8} ok boot /ssm@0,0/pci@1d,700000/pci@1/scsi@4/sd@6,0:f SunOS Release 5.9 Version Generic_112233-05 64-bit Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Cannot assemble drivers for root /ssm@0,0/pci@1d,700000/pci@1/scsi@4/sd@6,0:b Cannot mount root on /ssm@0,0/pci@1d,700000/pci@1/scsi@4/sd@6,0:b fstype ufs panic[cpu8]/thread=140a000: vfs_mountroot: cannot mount root 0000000001409970 genunix:vfs_mountroot+70 (0, 0, 0, 200, 149cc08, 0) %l0-3: 0000000001490800 0000000001490800 000000000142a568 000000000142a570 %l4-7: 000000000142a400 0000000001421f90 0000000001491000 0000000001494000 0000000001409a20 genunix:main+98 (1409ba0, f000cdc8, 1409ec0, 340ae4, 2000, 80) %l0-3: 0000000000000001 0000000000000000 0000000001423028 0000000078002000 %l4-7: 000000000140a000 0000000000342000 00000000014cf880 0000000001064c68 skipping system dump - no dump device configured rebooting... Resetting ... Copying IO prom to Cpu dram /ssm@0,0/pci@18,600000/pci@1/scsi@2,1 |
| gang5415 回复于：2003-09-28 22:15:02 |
| 紧急注意：你的CD-ROM的ID可能不是6吧。如果不是6的话，那么肯定起不来的，因为别名实际是给ID为6的设备起了个别名。
用下列命令找出CD-ROM的实际路径： OK probe-scsi | more 查找CD-ROM的物理路径，比如：/pci@1f,0/pci@1/scsi@1,1/disk 接着：OK boot /pci@1f,0/pci@1/scsi@1,1/disk 如果不是上述问题，那么可能是光驱的问题，换一个试一试吧。 |
| race 回复于：2003-09-28 22:18:54 |
| 晕 今天有个帖子和你的抱错完全一样。
http://www.chinaunix.net/forum/viewtopic.php?t=171984 |
| Bass3r 回复于：2003-09-28 22:30:15 |
| 多谢gang5415 和 RACE大哥 提醒，我再试试 |
| race 回复于：2003-09-28 22:32:24 |
| 够你忙一夜的了，我回去睡觉，6号见吧 |
| Bass3r 回复于：2003-09-29 11:25:55 |
| 忘了说了，F4800还没有系统，装完系统之后才能升级DRIVER和打PATCH。SCSI线和I/O槽都换过了，还是不行
现在的情况是：用6758 SCSI3的卡连接光驱，可以BOOT到一半，然后报上面我贴的错误信息。用2222 双SCSI口双以太网口卡连接光驱，直接显示CAN'T OPEN BOOT-DEVICE。 光驱接2222A的时候，cdrom的别名改了没有？ |
| suncn 回复于：2003-09-29 11:35:23 |
| 这个可能是个bug，你去sunsolve网站找找这个,bugid 4747426 |
| procrus 回复于：2003-09-29 11:56:21 |
| 我找了一下，没有找到 |
| Bass3r 回复于：2003-09-29 13:34:51 |
| [quote:01bbe8a6bf="suncn"]这个可能是个bug，你去sunsolve网站找找这个,bugid 4747426[/quote:01bbe8a6bf]
没有找到，你能说说具体怎样做吗？ |
| x3y4z5 回复于：2003-09-29 20:39:41 |
| 不行你就用boot net安装吧，效果一样的。做一个boot server, |
| procrus 回复于：2003-09-30 00:03:47 |
| 呵呵，以后客户要用怎么办，问题是要解决的 |
| iricyan 回复于：2003-09-30 00:23:47 |
| 这么厉害的机器还没有摸过，不过感觉是其他的硬件有问题，比如cpu什么的....
说是那块儿.. |
| suncn 回复于：2003-09-30 13:04:18 |
| Bug ID 4727426 probe-scsi-all Command Fails
This problem is on the Cauldron (X2222A) pci card connected to a D240 on a Sun Fire (Serengeti) machine. Problem: When a probe-scsi-all command is issued at the OBP level of a domain, a) the command does not display the entire path to the devices connected to it. b) issuing a boot command immediately fails. A reset or reset-all is required. The probe-scsi-all output does not show the entire path to the devices connected to a cauldron pci card. {10} ok probe-scsi-all /ssm@0,0/pci@1d,600000/SUNW,qlc@1 /ssm@0,0/pci@1d,700000/scsi@2,1 /ssm@0,0/pci@1d,700000/scsi@2 /ssm@0,0/pci@1c,600000/pci@1/scsi@2,1 /ssm@0,0/pci@1c,600000/pci@1/scsi@2 <<<<this is incomplete path Target 0 Unit 0 Disk FUJITSU MAJ3182M SUN18G 0804 Target 3 Unit 0 Processor 2 Target 6 Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011007 The following scenarios has happen in the Field resulting in not able to boot 1. using incomplete boot path ok> boot /ssm@0,0/pci@1c,600000/pci@1/scsi@2 ERROR: Can't open boot-device 2. using complete boot path to DVDrom ok>boot /ssm@0,0/pci@1c,600000/pci@1/scsi@2,0/disk@6,0:f ERROR: Fast Data Access MMU Miss It appears that a boot command is issued right after the probe-scsi-all command, the boot comamnd will fail with Can't open boot-device, Fast Data Access MMU Miss. This has been tested on system controller firmware 5.12.6 and 5.13.2 When a reset or reset-all command is issued, booting off the Cauldron (X2222A) card is successful. {10} ok reset-all Resetting ... Copying IO prom to Cpu dram .{/N0/SB4/P0} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P0} Copyright 2001 Sun Microsystems, Inc. All rights reserved. .............................{/N0/SB4/P0} Running PCI IO Controller Basic Tests {/N0/SB4/P0} Jumping to memory 00000000.00000020 [00000010] {/N0/SB4/P0} System PCI IO post code running from memory {/N0/SB4/P0} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P0} Copyright 2001 Sun Microsystems, Inc. All rights reserved. {/N0/SB4/P0} Subtest: PCI IO Controller Register Initialization for aid 0x1c {/N0/SB4/P0} Running PCI IO Controller Functional Tests {/N0/SB4/P0} Running SBBC Basic Tests {/N0/SB4/P0} Subtest: SBBC PCI Reg Initialization for aid 0x1c {/N0/SB4/P0} Running PCI IO Controller Basic Tests {/N0/SB4/P0} Subtest: PCI IO Controller Register Initialization for aid 0x1d {/N0/SB4/P0} Running PCI IO Controller Functional Tests {/N0/SB4/P0} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P0} Copyright 2001 Sun Microsystems, Inc. All rights reserved. {/N0/SB4/P1} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P1} Copyright 2001 Sun Microsystems, Inc. All rights reserved. {/N0/IB8/P0} Passed {/N0/IB8/P1} Passed {/N0/SB4/P0} Running Domain Level Tests {/N0/SB4/P2} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P3} @(#) lpost 5.12.6 2001/11/29 12:41 {/N0/SB4/P0} GLOBAL IO SRAM on board 8 {/N0/SB4/P2} Copyright 2001 Sun Microsystems, Inc. All rights reserved. {/N0/SB4/P3} Copyright 2001 Sun Microsystems, Inc. All rights reserved. {/N0/SB4/P0} Running Domain Basic Tests {/N0/SB4/P0} Running Domain Advanced Tests {/N0/SB4/P0} Running Domain Stick Sync Tests {/N0/SB4/P0} Running Domain Verify Stick Sync Tests {/N0/SB4/P0} DCB_DECOMP_OBP command succeeded {/N0/SB4/P0} GLOBAL IO SRAM on board 8 {/N0/SB4/P0} Committing retained memory 00000000.00b74000-00000000.00b75fff {/N0/SB4/P0} Retaining 00000000.00b74000-00000000.00b75fff {/N0/SB4/P0} Committing retained memory 00000000.00b92000-00000000.00b93fff {/N0/SB4/P0} Retaining 00000000.00b92000-00000000.00b93fff {/N0/SB4/P1} GLOBAL IO SRAM on board 8 {/N0/SB4/P0} CPU 17 clearing 00000000.00000000 to 00000000.002dd000 {/N0/SB4/P2} GLOBAL IO SRAM on board 8 {/N0/SB4/P0} CPU 18 clearing 00000000.002dd000 to 00000000.005ba000 {/N0/SB4/P3} GLOBAL IO SRAM on board 8 {/N0/SB4/P0} CPU 19 clearing 00000000.005ba000 to 00000000.00897000 {/N0/SB4/P0} CPU 16 clearing 00000000.00897000 to 00000000.00b74000 {/N0/SB4/P0} CPU 17 clearing 00000000.00b76000 to 00000000.00b7d000 {/N0/SB4/P0} CPU 18 clearing 00000000.00b7d000 to 00000000.00b84000 {/N0/SB4/P0} CPU 19 clearing 00000000.00b84000 to 00000000.00b8b000 {/N0/SB4/P0} CPU 16 clearing 00000000.00b8b000 to 00000000.00b92000 {/N0/SB4/P0} CPU 17 clearing 00000000.00b94000 to 00000000.808af000 {/N0/SB4/P0} CPU 18 clearing 00000000.808af000 to 00000001.005ca000 {/N0/SB4/P0} CPU 19 clearing 00000001.005ca000 to 00000001.802e5000 {/N0/SB4/P0} CPU 16 clearing 00000001.802e5000 to 00000002.00000000 {/N0/SB4/P0} GLOBAL IO SRAM on board 8 {/N0/SB4/P0} Decompress OBP done {/N0/SB4/P0} DCB_ENTER_OBP command succeeded {/N0/SB4/P1} DCB_ENTER_OBP command succeeded {/N0/SB4/P2} DCB_ENTER_OBP command succeeded {/N0/SB4/P3} DCB_ENTER_OBP command succeeded Sun Fire 4800 OpenFirmware version 5.12.6 (11/29/01 12:41) Copyright 2001 Sun Microsystems, Inc. All rights reserved. SmartFirmware, Copyright (C) 1996-2001. All rights reserved. 8192 MB memory installed, Serial #14199680. Ethernet address 8:0:20:d8:ab:80, Host ID: 80d8ab80. {10} ok boot /ssm@0,0/pci@1c,600000/pci@1/scsi@2,0/disk@6,0:f <---ok SunOS Release 5.8 Version Generic_108528-13 64-bit Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved. | {10} ok boot /ssm@0,0/pci@1c,600000/pci@1/scsi@2/disk@sd0,0 <---ok - |
| procrus 回复于：2003-09-30 14:12:50 |
| 好东西 |
| procrus 回复于：2003-09-30 14:15:18 |
| 建议斑竹加精华！！！ |
| williamw2000 回复于：2003-10-01 02:54:39 |
| Hardware issue, call SUN. |
| Bass3r 回复于：2003-10-01 09:24:18 |
| 对，就是这一行：
ok boot /ssm@0,0/pci@1c,600000/pci@1/scsi@2,0/disk@6,0:f 用 X2222A 连接D240 BOOT CDROM时必须BOOT这个物理路径，我当时什么都试了，就是没试 “/disk@6,0:f ”这个。嘿嘿，多谢SUNCN，象这种BUG在SUNSOLVE里怎么才能搜到啊？ |
| byuq 回复于：2003-10-01 10:38:53 |
| 这不是什么BUG呀！常识问题！ |
| Bass3r 回复于：2003-10-01 11:02:53 |
| [quote:dbae2c7c7b="byuq"]这不是什么BUG呀！常识问题！[/quote:dbae2c7c7b]
是吧，CDROM用 "/disk" @6,0:f 来BOOT，我是头一次听说，呵呵，我也问过SUN的工程师，他们有的可能没实施过，也不知道。以后有什么问题多向你请教了BYUQ兄 |
| race 回复于：2003-10-01 11:12:12 |
| 你怎么做CDROM的alias的？ |
| gang5415 回复于：2003-10-01 13:11:23 |
| OK devalias mycdrom /pci@1f..........（世纪的物理路径），可以用这个命令来查看一下。
OK show-devs来查看一下光驱的实际位置。 |
| 随风飘逸 回复于：2003-10-01 18:59:53 |
| 1032可以直接使用
2222需要你注意一下路径，也没有问题 6758不能直接用来做启动，需要先网络安装，然后装驱动、patch,后就可以使用。 |
| procrus 回复于：2003-10-01 22:33:48 |
| 原来4800这么麻烦 |
| solarwind 回复于：2004-02-12 15:00:46 |
| 遇到相同的问题，
sparc 1000E,很老的机器了~ 今天想重新SOLARIS 2.51，但是 OK boot cdrom ../../devices/io-unit@f,e0200000/sbi@0,0/dma@0,81000/esp@0,80000/sd@6,0:e 后就死在哪儿里，光驱灯也不闪。 用硬盘启动后，光驱也mount不上。 OK probe-sici-all 能看到toshiba光驱。 OK devalias 看到光驱的实际物理路径../../devices/io-unit@f,e0200000/sbi@0,0/dma@0,81000/esp@0,80000/sd@6,0:e 跟boot cdrom时的一样，2年前，我就是用这个光驱装的现在的系统。 中间再没动过~也没注意过。 能否判定这个光驱已经坏掉了呢？ :em10: |
延伸阅读
文章来源于领测软件测试网 https://www.ltesting.net/
