让VC不再编译帮助文件的方法
VC帮助虽然很好，但有时很烦，每一次编译都会自动编译帮助文件，不理我们有没有修改过RTF文件，耗神又耗时间，实在让人烦。
怎么弄掉这帮助呢？上网上去问，没人回答。在Project Settings里找，也没找到。Google里搜，也没搜到。一开始我怀疑是MakeHelp.bat，还真去解决掉他，编译时也没发现什么大问题，还高兴地上了论坛发表自己的见解。但不好的是，网友demetry发短信告诉我这方法不行，他试了。真的不行，我一开始不信，明明我试了是可以的呀，怎么到他手上就不行了呢？不信他的，发信说他是不是操作错了。过了一一天，他发信来了，来了一句”你在仔细试一下。我已经试过很多次。你这个方法不行。”我仔细地试了一下，汗颜，真的不行。
仔细找了一下，项目文件里没什么特别的文件，但有一个DSP文件，用记事本打开此文件仔细看一下，发现有三个地方是用于处理帮助文件的编译的。祸根正是由这三段代码产生，下面我们一起来来铲除祸根。
祸根一、Making help file...
|
SOURCE=.\hlp\Test.hpj !IF "$(CFG)" == "Test - Win32 Release" # PROP Ignore_Default_Tool 1 USERDEP__TEST_=hlp\AfxCore.rtf hlp\AfxPrint.rtf hlp\$(TargetName).hm # Begin Custom Build - Making help file... OutDir=.\Release TargetName=Test InputPath=.\hlp\Test.hpj InputName=Test "$(OutDir)\$(InputName).hlp" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" start /wait hcw /C /E /M "hlp\$(InputName).hpj" if errorlevel 1 goto :Error if not exist "hlp\$(InputName).hlp" goto :Error copy "hlp\$(InputName).hlp" $(OutDir) goto :done :Error echo hlp\$(InputName).hpj(1) : error: type "hlp\$(InputName).log" :done
# End Custom Build !ELSEIF "$(CFG)" == "Test - Win32 Debug" # PROP Ignore_Default_Tool 1 USERDEP__TEST_=hlp\AfxCore.rtf hlp\AfxPrint.rtf hlp\$(TargetName).hm # Begin Custom Build - Making help file... OutDir=.\Debug TargetName=Test InputPath=.\hlp\Test.hpj InputName=Test "$(OutDir)\$(InputName).hlp" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" start /wait hcw /C /E /M "hlp\$(InputName).hpj" if errorlevel 1 goto :Error if not exist "hlp\$(InputName).hlp" goto :Error copy "hlp\$(InputName).hlp" $(OutDir) goto :done :Error echo hlp\$(InputName).hpj(1) : error: type "hlp\$(InputName).log" :done
# End Custom Build !ENDIF # End Source File # Begin Source File |
把此段代码用以下代码替换它，或者干脆删掉它。
|
SOURCE=.\hlp\Test.hpj # End Source File # Begin Source File |
祸根二、Making help include file...
|
SOURCE=.\Resource.h !IF "$(CFG)" == "Test - Win32 Release" # PROP Ignore_Default_Tool 1 # Begin Custom Build - Making help include file... TargetName=Test InputPath=.\Resource.h "hlp\$(TargetName).hm" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" echo. >"hlp\$(TargetName).hm" echo // Commands (ID_* and IDM_*) >>"hlp\$(TargetName).hm" makehm ID_,HID_,0x10000 IDM_,HIDM_,0x10000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Prompts (IDP_*) >>"hlp\$(TargetName).hm" makehm IDP_,HIDP_,0x30000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Resources (IDR_*) >>"hlp\$(TargetName).hm" makehm IDR_,HIDR_,0x20000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Dialogs (IDD_*) >>"hlp\$(TargetName).hm" makehm IDD_,HIDD_,0x20000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Frame Controls (IDW_*) >>"hlp\$(TargetName).hm" makehm IDW_,HIDW_,0x50000 resource.h >>"hlp\$(TargetName).hm"
# End Custom Build !ELSEIF "$(CFG)" == "Test - Win32 Debug" # PROP Ignore_Default_Tool 1 # Begin Custom Build - Making help include file... TargetName=Test InputPath=.\Resource.h "hlp\$(TargetName).hm" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" echo. >"hlp\$(TargetName).hm" echo // Commands (ID_* and IDM_*) >>"hlp\$(TargetName).hm" makehm ID_,HID_,0x10000 IDM_,HIDM_,0x10000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Prompts (IDP_*) >>"hlp\$(TargetName).hm" makehm IDP_,HIDP_,0x30000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Resources (IDR_*) >>"hlp\$(TargetName).hm" makehm IDR_,HIDR_,0x20000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Dialogs (IDD_*) >>"hlp\$(TargetName).hm" makehm IDD_,HIDD_,0x20000 resource.h >>"hlp\$(TargetName).hm" echo. >>"hlp\$(TargetName).hm" echo // Frame Controls (IDW_*) >>"hlp\$(TargetName).hm" makehm IDW_,HIDW_,0x50000 resource.h >>"hlp\$(TargetName).hm"
# End Custom Build !ENDIF # End Source File # Begin Source File |
把上面这段代码用以下内容替换它，千万别删了。
|
SOURCE=.\Resource.h # End Source File # Begin Source File |
祸根三、Copying contents file...
|
SOURCE=.\hlp\Test.cnt !IF "$(CFG)" == "Test - Win32 Release" # PROP Ignore_Default_Tool 1 # Begin Custom Build - Copying contents file... OutDir=.\Release InputPath=.\hlp\Test.cnt InputName=Test "$(OutDir)\$(InputName).cnt" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" copy "hlp\$(InputName).cnt" $(OutDir) # End Custom Build !ELSEIF "$(CFG)" == "Test - Win32 Debug" # PROP Ignore_Default_Tool 1 # Begin Custom Build - Copying contents file... OutDir=.\Debug InputPath=.\hlp\Test.cnt InputName=Test "$(OutDir)\$(InputName).cnt" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)" copy "hlp\$(InputName).cnt" $(OutDir) # End Custom Build !ENDIF # End Source File # End Group # Begin Source File |
把上面这段代码用以下内容替换它，最好别删了。
|
SOURCE=.\hlp\Test.cnt # End Source File # End Group # Begin Source File |
好了，解决了，世界又恢复了清净。
在此也谢谢demetry，如何没有他的细心，可能我一直还以为自己已经解决了这问题呢。
文章来源于领测软件测试网 https://www.ltesting.net/
