• 软件测试技术
  • 软件测试博客
  • 软件测试视频
  • 开源软件测试技术
  • 软件测试论坛
  • 软件测试沙龙
  • 软件测试资料下载
  • 软件测试杂志
  • 软件测试人才招聘
    暂时没有公告

字号: | 推荐给好友 上一篇 | 下一篇

安全CCIE lab 学习以及考试建议

发布: 2007-6-23 18:14 | 作者:   | 来源: 烦尘俗世  | 查看: 15次 | 进入软件测试论坛讨论

领测软件测试网

   

Assessing Strengths
  Using the content blueprint, determine your experience and knowledge in the major topic areas. For areas of strength, practicing for speed should be your focus. For weak areas, you may need training or book study in addition to practice.

Study Materials
  Choose lab materials that provide configuration examples and take a hands-on approach. Look for materials that are approved or provided by Cisco and its Learning Partners.

Hands-On Practice
  Build and practice lab scenarios on a per topic basis. Go beyond the basics and practice additional features. Learn the show and debug commands along with each topic. If a protocol has multiple ways of configuring a feature, practice all of them.

Cisco Documentation CD
  Make sure you can navigate the Cisco documentation CD with confidence because this is the only resource you will be allowed during the lab. Make the CD part of your regular study; if you are familiar with it, you can save time during the exam.

Home Labs
  Although acquiring a personal home lab is ideal, it can be costly to gather all the equipment you will need. For the hardware devices that are costly to obtain, you may be able to rent the equipment online at a more reasonable cost.

 

>TEN TIPS FOR TAKING THE LAB EXAM

Read the entire exam first and check for addressing issues. Do not skip any details or sections.


Manage your time. Make a plan to cover all the sections in the time provided. Work out how much time you will spend on each section, keeping in mind the point value of the questions. Don’t forget to allow time at the end to verify your solutions.


Clarify the requirements of each question. Don’t assume requirements that aren’t mentioned in the question. During the lab, if you are in any doubt, verify your understanding of the question with the proctor.


Do each question as a unit. Configure and verify before moving to the next question. You may want to redraw the topology with all the details available. This will help you visualize and map the.network.


Troubleshoot. You must know how to troubleshoot using the tools available. Although troubleshooting is important, don’t lose too much time working on a 2- or 3-point question. If you’re caught off-guard by an unfamiliar topic, don’t let it absorb too much time. Work on the things you are more comfortable with and go back to difficult items later.


Keep a list. During the exam, make notes on configurations and settings as you move through the exam. Make a separate list for items you have not been able to address or where you have not achieved the desired result which you’ll need to revisit.


Test your work. Never rely on a configuration done in the early hours of the exam. There is a possibility that an item you configured a few sections earlier can become broken and non-functional. Keep in mind that points are awarded for working configuration only.


Save your configurations often.


Don’t make any drastic changes in the last half hour of the exam.


Speed is vital on the exam. Review and practice core material the week before the exam to ensure you can move quickly through the less challenging questions.

延伸阅读

文章来源于领测软件测试网 https://www.ltesting.net/


关于领测软件测试网 | 领测软件测试网合作伙伴 | 广告服务 | 投稿指南 | 联系我们 | 网站地图 | 友情链接
版权所有(C) 2003-2010 TestAge(领测软件测试网)|领测国际科技(北京)有限公司|软件测试工程师培训网 All Rights Reserved
北京市海淀区中关村南大街9号北京理工科技大厦1402室 京ICP备2023014753号-2
技术支持和业务联系:info@testage.com.cn 电话:010-51297073

软件测试 | 领测国际ISTQBISTQB官网TMMiTMMi认证国际软件测试工程师认证领测软件测试网