RFC2056 - Uniform Resource Locators for Z39.50

领测软件测试网

　　 
　　Network Working Group R. Denenberg
Request for Comments: 2056 Library of Congress
Category: Standards Track J. Kunze
University of California, San Francisco
D. Lynch
SilverPlatter Information Ltd.
Editors

November 1996

Uniform Resource Locators for Z39.50

Status of this Memo

This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.

1. Introduction

Z39.50 is an information retrieval protocol that does not fit neatly
into a retrieval model designed primarily around the stateless fetch
of data. Instead, it models a general user inquiry as a session-
oriented, multi-step task, any step of which may be suspended
temporarily while the server requests additional parameters from the
client before continuing. Some, none, or all of these client/server
interactions may require participation of the client user, depending
only on the client software (the protocol itself makes no such
requirements).

On the other hand, retrieval of "well-known" data may be performed in
a single step, that is, with a degenerate Z39.50 session consisting
of exactly one protocol search request and response. Besides the
basic search sub-service, there are several ancillary sub-services
(e.g., Scan, Result Set Delete). Among the functions covered by
combinations of the sub-services, two core functions emerge as
appropriately handled by two separate URL schemes: the Session URL
and the Retrieval URL.

Using two schemes instead of one makes a critical distinction between
a Z39.50 Session URL, which opens a client session initialized for
interactive use by the user, and a Z39.50 Retrieval URL, which opens
and closes a client session to retrieve a specific information item.
Making this distinction at the scheme level allows the user interface
to reflect it on to the user, without requiring the user interface to

parse otherwise opaque parts of the URL (consistent with current
practice).

2. Some Basic Concepts

This section briefly describes the usage of Z39.50-specific
terminology within the URL definitions below: specifically, the terms
database, elementset, recordsyntax, and docid.

The Z39.50 protocol specifies various information retrieval
operations, the two most basic of which are Search and Present. In a
Search operation a client provides search criteria and indicates a
database (or several databases) on the server to search. The
essential result of a Search operation is that a result set is
created at the server, consisting of pointers to the selected
database records.

Z39.50 models database records, abstract database records, and
retrieval records. A database record is a unit of information in a
database, represented in a data structure local to the server. An
abstract database record is an abstract representation of that
information, where the client and server share a common understanding
of the representation. This allows logical elements to be addressed
and selected for transfer, via an element set specification, or, as
used below, an "elementset". A retrieval record is the set of
selected elements packaged in an exportable structure, by the
application of a "recordsyntax".

Thus a Search operation results in entries pointing to database
records; via a Present operation, a client requests a retrieval
record, corresponding to a database record, corresponding to an entry
in the result set. The client indicates the composition and format of
the retrieval record by specifying an elementset and recordsyntax,
respectively.

A special case of a Z39.50 search is a "known-item" search, when a
client intends that a search identify a single, known database
record, or "document" (for purposes of illustration, assume that a
database record corresponds to a document), and further, the client
knows an identifier for the document that can be used to effect this
known-item search. In this case, this identifier is often referred
to as a document identifier, or "docid".

3. The Z39.50 Session URL

The Z39.50 Session URL may be informally described as providing the
mechanism to switch the user to a Z39.50 client application.

- Host is required.
- Port is optional, and defaults to 210.
- All other parameters are optional.
- The Z39.50 client will start a session to the specified host/port
(alternatively, it need not explicitly start a session, but may
instead utilize an already open session to the same host/port).
- A database must be included if docid is included.
- If docid is included, the client will perform the specified search
(in the same manner as for the retrieval URL, specified below).
- If docid is not included, and other parameters (besides host/port)
are specified, the client may use those parameters as "hints".
Various clients may choose to treat them as requirements, or as
preferences, or ignore them.
- In any case (whether a search is performed or not), the client
will leave the Z39.50 session open for the user, to do
retrievals, new searches, etc. (This is the main distinction
from the Retrieval URL which leaves it up to the client whether
or not to keep the Z39.50 session open.)

4. The Z39.50 Retrieval URL

The Z39.50 Retrieval URL is intended to allow a Z39.50 session to be
used as a transparent transfer mechanism to retrieve a specific
information object. A Z39.50 client uses information in the URL to
formulate a Search Request. The server's Search Response indicates
how many records match the Request. If the number of matching
records does not equal one, the retrieval is considered unsuccessful,
and the client application's behavior is not defined. If the number
of matching records equals one, the server may have included the
desired record in the Search Response. If not, the client requests
transmission of the record with a Present Request. After the client
has received the specified record it may close the Z39.50 session
immediately, or keep it open for subsequent retrievals.

- Host is required.
- Port is optional, and defaults to 210.
- A database is required.
- The meaning of a retrieval URL with no docid is undefined.
- The docid is placed into a type-1 query, as the single term, in
the general format (tag 45), using the Bib-1 attribute set, with
a Use attribute value of docid, and a structure attribute of URx.
The docid string is server-defined and completely opaque to the
client.

- If element set name (esn) is not specified, it is the client's
choice. If esn is specified, it should be used either in the
Search request for the value of small- and/or medium-
set-element-set-names or in a Present request following a
Search. These terms and their use are defined within the Z39.50
Standard [2].
- If record syntax (rs) is not specified, it is the client's choice.
If one or more record syntaxes are specified, the client should
select one (preferably the first in the list that it supports)
and use it in a Search or Present request as the value of
PreferredRecordSyntax.

5. BNF for Z39.50 URLs

The Z39.50 Session and Retrieval URLs follow the Common Internet
Scheme Syntax as defined in RFC1738, "Uniform Resource Locators
(URL)" [1]. In the definition, literals are quoted with "", optional
elements are enclosed in [brackets], "|" is used to designate
alternatives, and elements may be preceded with <n>* to designate n
or more repetitions of the following element; n defaults to 0.

z39.50url = zscheme "://" host [":" port]
["/" [database *["+" database]
["?" docid]]
[";esn=" elementset]
[";rs=" recordsyntax *[ "+" recordsyntax]]]

zscheme = "z39.50r" | "z39.50s"
database = uchar
docid = uchar
elementset = uchar
recordsyntax = uchar

Future extensions to these URLs will be of the form of
[;keyword=value].

The following definitions are from RFC1738. Between the Internet
Draft version and RFC1738 two relevant changes were made: '=' was
moved from the <extra> character class to <reserved>, and <national>
was removed from the alternatives in <unreserved>. Neither <national>
nor <punctuation> is referred to in this document nor in RFC1738.

lowalpha = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" |
"i" | "j" | "k" | "l" | "m" | "n" | "o" | "p" |
"q" | "r" | "s" | "t" | "u" | "v" | "w" | "x" |
"y" | "z"
hialpha = "A" | "B" | "C" | "D" | "E" | "F" | "G" | "H" | "I" |
"J" | "K" | "L" | "M" | "N" | "O" | "P" | "Q" | "R" |
"S" | "T" | "U" | "V" | "W" | "X" | "Y" | "Z"

alpha = lowalpha | hialpha
digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |
"8" | "9"
safe = "$" | "-" | "_" | "." | "+"
extra = "!" | "*" | "'" | "(" | ")" | ","
national = "{" | "}" | "|" | "\" | "^" | "~" | "[" | "]" | "`"
punctuation = "<" | ">" | "#" | "%" | <">

reserved = ";" | "/" | "?" | ":" | "@" | "&" | "="
hex = digit | "A" | "B" | "C" | "D" | "E" | "F" |
"a" | "b" | "c" | "d" | "e" | "f"
escape = "%" hex hex
unreserved = alpha | digit | safe | extra
uchar = unreserved | escape
xchar = unreserved | reserved | escape
digits = 1*digit

6. Security Considerations

The two Z39.50 URL schemes are subject to the same security
implications as the general URL scheme [1], so the usual precautions
apply. This means, for example, that a locator might no longer point
to the object that was originally intended. It also means that it
may be possible to construct a URL so that an attempt to perform a
harmless idempotent operation such as the retrieval of an object will
in fact cause a possibly damaging remote operation to occur.

7. Acknowledgements

The Z39.50 Implementors Group contributed the substance of this
document.

8. References

[1] Berners-Lee, T., Masinter, L., McCahill, M. (editors), "Uniform
Resource Locators (URL)", RFC1738, December 1994.
ftp://ds.internic.net/rfc/rfc1738.txt

[2] ANSI/NISO Z39.50-1995, "ANSI Z39.50: Information Retrieval
Service and Protocol", 1995. ftp://ftp.loc.gov/pub/z3950/

[3] ANSI/NISO Z39.50-1992, "ANSI Z39.50: Information Retrieval
Service and Protocol", 1992.
ftp://ftp.cni.org/pub/NISO/docs/Z39.50-1992/www/Z39.50.toc.html
(also available in hard copy from Omnicom Information Service,
115 Park St., SE, Vienna, VA 22180).

9. Editors' Addresses

Ray Denenberg
Library of Congress
Collections Services
Network Development/MSO
Washington DC 20540

Phone: (202) 707-5795
Fax: (202) 707-0115
EMail: ray@rden.loc.gov

John A. Kunze
Center for Knowledge Management
University of California, San Francisco
530 Parnassus Ave, Box 0840
San Francisco, CA 94143-0840

Phone: (415) 502-6660
Fax: (415) 476-4653
EMail: jak@ckm.ucsf.edu

Denis Lynch
SilverPlatter Information Ltd.
10 Barely Mow Passage
Chiswick, London W4 4PH
U.K.

Voice: +44 (0)181-995-8242
Fax: +44 (0)181-995-5159
EMail: DenisL@SilverPlatter.com

Appendix. Examples of Z39.50 URLs

A basic Z39.50 session URL that a client might use to open a
connection to the MELVYL union catalog "cat" at the University of
California is

z39.50s://melvyl.ucop.edu/cat

A URL that would open the MELVYL magazine database just long enough
to fetch an article from volume 30, number 19 of a hypothetical
periodical might look like

z39.50r://melvyl.ucop.edu/mags?elecworld.v30.n19

As a final example, here is another retrieval URL that a client could
use to request a full record (element set "f") in the MARC syntax
from a hypothetical database called TMF at CNIDR:

z39.50r://cnidr.org:2100/tmf?bkirch_rules__a1;esn=f;rs=marc

As in the previous example, the part of the string after the `?' is
determined by the server. In this example, the server is running on
non-standard port 2100.

文章来源于领测软件测试网 https://www.ltesting.net/