• 软件测试技术
  • 软件测试博客
  • 软件测试视频
  • 开源软件测试技术
  • 软件测试论坛
  • 软件测试沙龙
  • 软件测试资料下载
  • 软件测试杂志
  • 软件测试人才招聘
    暂时没有公告

字号: | 推荐给好友 上一篇 | 下一篇

在linux系统下安装nvidia-nforce网卡/声卡驱动

发布: 2007-7-04 12:06 | 作者: admin | 来源:  网友评论 | 查看: 115次 | 进入软件测试论坛讨论

领测软件测试网 在linux系统下安装nvidia-nforce网卡/声卡驱动

linux 内核不认nvidia的网卡和声卡,可以

在如下地址下载驱动( http://www.nvidia.com/object/linux_nforce_1.0-0292.html ;)

Linux nForce Driver - IA32

Version: 1.0-0292
Release Date: October 20, 2004

  • Added support for kernel installations that use separate kernel source and generated kernel object trees.
  • Fixed nvnet problem that caused rmmod to crash on systems with more than one network interface.
  • Fixed nvnet build issue on uniprocessor systems that have spinlock debugging enabled.
  • Added support for Ethernet driver statistics and configuration information through procfs
  • Fixed nvsound module hangs when APIC is enabled on some distributions.
  • Fixed nvsound module bugs causing lack of sound or delay in sound with some games.

This page contains drivers and documentation for the nForce chipset. The chipset includes hardware support for IDE disk control, Ethernet networking, audio support, win modem support, and a USB controller. These packages have support for Ethernet networking and basic ACI audio. USB and IDE hardware will work with standard Linux drivers. There is no win modem support.

To download and install the drivers, follow the steps below:

STEP 1: Download the Driver File
Download - NFORCE-Linux-x86-1.0-0292-pkg1.run

STEP 2: Begin Installation
From within a shell with root privileges, type "sh NFORCE-Linux-x86-1.0-0292-pkg1.run" to initiate the installation.

STEP 3: Review the NVIDIA Software License. You will need to accept this license to continue with the installation.

STEP 4: Review the Known Problems for any special installation instructions required by your platform.

STEP 5: Install
Follow the directions provided by the installer.  The installer will prepare the driver and install the driver and application files in the appropriate place.

Note:  For systems running a kernel for which there is no pre-built binary driver, the installer will need to build the driver.  In order for the installer to build the driver, the kernel source needs to be installed.

STEP 6: Review Documentation
Refer to the ReleaseNotes (HTML Version) (installed in /usr/share/doc/nforce) for instructions on configuring the system with the installed drivers.

If you have any questions or problems, please check the linux discussion forum. If you don't find an answer to your question there, you can send email to linux-nforce-bugs@nvidia.com

Release Highlights for 1.0-0292:

延伸阅读

文章来源于领测软件测试网 https://www.ltesting.net/


关于领测软件测试网 | 领测软件测试网合作伙伴 | 广告服务 | 投稿指南 | 联系我们 | 网站地图 | 友情链接
版权所有(C) 2003-2010 TestAge(领测软件测试网)|领测国际科技(北京)有限公司|软件测试工程师培训网 All Rights Reserved
北京市海淀区中关村南大街9号北京理工科技大厦1402室 京ICP备2023014753号-2
技术支持和业务联系:info@testage.com.cn 电话:010-51297073

软件测试 | 领测国际ISTQBISTQB官网TMMiTMMi认证国际软件测试工程师认证领测软件测试网