NBAR是一种动态能在四到七层寻找协议的技术,它不但能做到普通ACL能做到那样控制静态的TCP UDP的报,也能做到控制一般ACLs不能做到动态的端口的那些协议(如BT)之类.
我就说说过程:
1到http://www.cisco.com/pcgi-bin/tablebuild.pl/pdlm 下载bittorrent.pdlm,(要CCO的)
2放到TFTP,然后用copy tftp disk2(大多数应该是flash)
拷到路由器中,
route7206#conf t
Enter configuration commands, one per line. End with CNTL/Z.
route7206(config)#ip nbar pdlm bittorrent.pdlm
route7206(config)#
!
ip nbar pdlm bittorrent.pdlm
!
1.) 创建一个 a class-map and policy map 并且把它应用到相应的端口:
得到关于BT的部分是
class-map match-all bittorrent
match protocol bittorrent
!
!
policy-map bittorrent-policy
class bittorrent
drop
!
interface GigabitEthernet0/2
description CONNECT INSIDE
ip address 192.168.168.1 255.255.255.252 secondary
ip address 192.168.21.1 255.255.255.0
ip nat inside
service-policy input bittorrent-policy
service-policy output bittorrent-policy
duplex full
speed 1000
media-type rj45
no negotiation auto
延伸阅读
文章来源于领测软件测试网 https://www.ltesting.net/