谁能说一下e450前控制面板上的六个灯的状态的详细说明
给个资料也可以
谢谢了
real 回复于:2003-09-04 17:52:20 |
1 2 3
4 5 6 1 : Power-on This green LED lights steadily when the system power is on and the keyswitch is in the On, Diagnostics, or Locked position. 2 : General fault This yellow LED blinks slowly while the system runs its power-on self-test (POST) diagnostics and blinks rapidly during OpenBoot diagnostic (OBDiag) tests. It lights steadily when any fault is detected (including a fault also reported by any other LED). 3 : Activity This green LED blinks continuously to indicate that the system is operating normally. Disk fault This yellow LED lights steadily to indicate a fault in one of the hard disk drives. When this LED is lit, one or more disk LEDs may also be lit, indicating the source of the fault. 4 : Temperature fault This yellow LED lights steadily to indicate an over-temperature condition in the system or a faulty fan assembly. 5 : Power supply fault This yellow LED lights steadily to indicate a fault in one of the power supplies. When this LED is lit, LEDs on the rear of the power supply will indicate the source of the fault. 6 : Power Supply LEDs |
南非蜘蛛 回复于:2003-09-04 19:59:25 |
不错 |
aloneflasher 回复于:2003-09-04 23:25:28 |
谢谢了,另外请问,这些资料上哪可以查到? |
garygao 回复于:2003-09-05 10:52:58 |
随机手册或者FE handbook上都有 |
aloneflasher 回复于:2003-09-08 10:35:25 |
我查看了一下messages这个文件
提示如下错误 warning:cpu fans set to max.cpu temp is 79 我想是不是由于cpu的温度过高,所以2,5灯亮为黄色 |
iricyan 回复于:2003-09-08 10:51:19 |
除尘试试 |
rocazj 回复于:2003-09-08 12:03:04 |
1、到sun的网站去找handbook就可以,非常详细。
2、还有就是e450 owner's guide,也非常详细。 |
kan_kang 回复于:2003-09-08 15:35:51 |
http://sunsolve.sun.com/handbook_pub/General/LEDs/E450_LEDs.html
看看说的详细不? |
延伸阅读
文章来源于领测软件测试网 https://www.ltesting.net/