用slackware架设虚拟主机管理系统（一）

# Config information for eth0:
IPADDR[0]＝“20.20.20.28”
NETMASK[0]＝“255.255.255.0”
USE_DHCP[0]＝“”
DHCP_HOSTNAME[0] ＝“”

# Config information for eth1:
IPADDR[1]＝“”
NETMASK[1]＝“”
USE_DHCP[1]＝“”
DHCP_HOSTNAME[1]＝“”

# Config information for eth2:
IPADDR[2]＝“”
NETMASK[2]＝“”
USE_DHCP[2]＝“”
DHCP_HOSTNAME[2]＝“”

# Config information for eth3:
IPADDR[3]＝“”
NETMASK[3]＝“”
USE_DHCP[3]＝“”
DHCP_HOSTNAME[3]＝“”

# Default gateway IP address:
GATEWAY＝“20.20.20.252”

# Change this to “yes” for debugging output to stdout.  Unfortunately,
# /sbin/hotplug seems to disable stdout so you’ll only see debugging output
# when rc.inet1 is called directly.
DEBUG_ETH_UP＝“no”
EOF

　　2、设置主机名

　　我用的主机名是www.test.com

cat > /etc/HOSTNAME < < "EOF"

www.test.com

EOF

chmod 644 /etc/HOSTNAME

　　3、设置host文件

cat > /etc/hosts < < "EOF"
127.0.0.1        localhost
20.20.20.28     serv1.test.com serv1
20.20.20.28     test.com

EOF

chmod 644 /etc/hosts

　　4、设置DNS

 cat > /etc/resolv.conf << “EOF”
nameserver 202.106.0.20
EOF

　　通过上面这些设置，重启系统后，我的slackware linux系统就可以访问互联网了。这个很重要，因为后面要下载一些软件。

　　设置inetd

　　slackware默认通过inetd来起动proftp等进程。但这些并不适合我们作虚拟主机服务。我们需要通过下面的设置，关掉inetd起动的进程。

mv /etc/inetd.conf /etc/inetd.conf.old

cat > /etc/inetd.conf << “EOF”
# pop3    stream  tcp     nowait  root    /usr/sbin/tcpd  /usr/sbin/popa3d
# auth   stream   tcp   wait   root   /usr/sbin/in.identd   in.identd
#
# ftp     stream  tcp     nowait  root    /usr/sbin/tcpd proftpd
# echo    stream tcp nowait root internal
# echo    dgram udp wait root internal
# discard stream tcp nowait root internal
# discard dgram udp wait root internal
# daytime stream tcp nowait root internal
# daytime dgram udp wait root internal
# chargen stream tcp nowait root internal
# chargen dgram udp wait root internal
# time  stream tcp nowait root internal
# time  dgram udp wait root internal
# telnet stream  tcp     nowait  root    /usr/sbin/tcpd in.telnetd
# comsat        dgram   udp     wait    root    /usr/sbin/tcpd  in.comsat
# imap2   stream  tcp     nowait  root    /usr/sbin/tcpd  imapd
# finger stream tcp nowait nobody /usr/sbin/tcpd in.fingerd -u
# systat stream tcp nowait nobody /usr/sbin/tcpd /bin/ps -auwwx
# netstat stream tcp nowait root /usr/sbin/tcpd /bin/netstat -a
EOF

chmod 644 /etc/inetd.conf

　　重启inetd

/etc/rc.d/rc.inetd stop
chmod 444 /etc/rc.d/rc.inetd

　　起动MySQL服务

　　1、安装mysql数据库

su mysql

mysql_install_db

exit

chmod +x /etc/rc.d/rc.mysqld

/etc/rc.d/rc.mysqld start

　　2、设置root密码

mysql -u root mysql

　　在mysql>提示符下输入

update user set password＝password(“dbpasswd”) where user＝“root”;

exit

mysqladmin -u root reload

　　3、创建mysql的配置文件

cat > /etc/my.cnf < < "EOF"

	
[mysqld]

datadir ＝/var/lib/mysql

port    ＝3306

socket  ＝/var/run/mysql/mysql.sock


	
[mysql.server]

user    ＝mysql

basedir ＝/var/lib


	
[safe_mysqld]

err-log ＝/var/log/mysqld.log

pid-file＝/var/run/mysql/mysql.pid


	
EOF
 
　　开机自动启动mysql
chmod +x /etc/rc.d/rc.mysql

　　安装各种图形库
　　1、png
cd /usr/src

wget http://unc.dl.sourceforge.net/sourceforge/libpng/libpng-1.2.8.tar.gz

tar -xvzf libpng-1.2.8.tar.gz

cd libpng-1.2.8


	
cp scripts/makefile.linux makefile


	
make

make install

make install-headers

　　2、JPEG -6b
cd /usr/src

wget http://www.ijg.org/files/jpegsrc.v6b.tar.gz

tar -xvzf jpegsrc.v6b.tar.gz


	
cd jpeg-6b

./configure ?prefix＝/usr


	
make


	
mkdir /usr/man

mkdir /usr/man/man1

make install

make install-headers

make install-lib




　　3、FREETYPE

cd /usr/src

wget http://ufpr.dl.sourceforge.net/sourceforge/freetype/freetype-2.1.9.tar.gz

tar -xvzf freetype-2.1.9.tar.gz


	
cd /usr/src/freetype-2.1.9

./configure ?prefix＝/usr

make

make install


　　4、GD
cd /usr/src

wget http://www.boutell.com/gd/http/gd-2.0.33.tar.gz

tar -zxf gd-2.0.33.tar.gz

cd /usr/src/gd-2.0.33

	
./configure ?prefix＝/usr 

?with-png＝/usr 

?with-freetype＝/usr 

?with-jpeg＝/usr
	
make
	
make install