• 软件测试技术
  • 软件测试博客
  • 软件测试视频
  • 开源软件测试技术
  • 软件测试论坛
  • 软件测试沙龙
  • 软件测试资料下载
  • 软件测试杂志
  • 软件测试人才招聘
    暂时没有公告

字号: | 推荐给好友 上一篇 | 下一篇

RFC2241 - DHCP Options for Novell Directory Services

发布: 2007-6-23 14:09 | 作者:   | 来源:   | 查看: 17次 | 进入软件测试论坛讨论

领测软件测试网

   
  Network Working Group D. Provan
Request for Comments: 2241 Novell, Inc.
Category: Standards Track November 1997

DHCP Options for Novell Directory Services

Status of this Memo

This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.

Copyright Notice

Copyright (C) The Internet Society (1997). All Rights Reserved.

Abstract

This document defines three new DHCP options for delivering
configuration information to clients of the Novell Directory
Services. The first option carries a list of NDS servers. The second
option carries the name of the client's NDS tree. The third carries
the initial NDS context. These three options provide an NDS client
with enough information to connect to an NDS tree without manual
configuration of the client.

1. Introduction

Novell Directory Services is a distributed, replicated, hierarchical
database of objects representing network resources such as nodes,
services, users, and applications. An NDS client must be able to
locate an NDS server in order to authenticate itself to the network
and gain access to the database. In addition, the node's user is
better served if the NDS client's attention is focused on the area of
the NDS database likely to be of the most interest to the user. This
specification describes DHCP options [1] that carry NDS information
to TCP/IP clients of NDS. The first option, the NDS Servers Option,
carries a list of NDS servers. The other two options, the NDS Tree
Name Option and the NDS Context Option, provide the client with a
default context within the NDS database.

The NDS Tree Name Option and the NDS Context Option carry 16-bit
Unicode text encoded into an octet stream using UTF-8 [4]. A complete
DHCP implementation can represent of the entire Unicode character set
supported by NDS. At the same time, 7-bit ASCII text is unchanged by
the UTF-8 transformation. In environments where the NDS tree name and
context are restricted to the range of 7-bit ASCII characters, ASCII-
only DHCP clients and servers can support these options by using the
ASCII text as the UTF-8 encoded data.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC2119. [2]

2. NDS Servers Option

This option specifies one or more NDS servers for the client to
contact for access to the NDS database. Servers SHOULD be listed in
order of preference.

The code for this option is 85. The minimum length of this option is
4 octets, and the length MUST be a multiple of 4.

Code Len Address 1 Address 2
+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+--
| 85 | n | a1 | a2 | a3 | a4 | a1 | a2 | a3 | a4 | ...
+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+--

3. NDS Tree Name Option

This option specifies the name of the NDS tree the client will be
contacting. NDS tree names are 16-bit Unicode strings. For
transmission in the NDS Tree Name Option, an NDS tree name is
transformed into octets using UTF-8. The string should NOT be zero
terminated.

The code for this option is 86. The maximum possible length for this
option is 255 bytes.

Code Len NDS Tree Name
+----+----+----+----+----+----+--
| 86 | n | c1 | c2 | c3 | c4 | ...
+----+----+----+----+----+----+--

4. NDS Context Option

This option specifies the initial NDS context the client should use.
NDS contexts are 16-bit Unicode strings. For transmission in the NDS
Context Option, an NDS context is transformed into octets using UTF-
8. The string should NOT be zero terminated.

A single DHCP option can only contain 255 octets. Since an NDS
context name can be longer than that, this option can appear more
than once in the DHCP packet. The contents of all NDS Context options
in the packet should be concatenated as suggested in the DHCP
specification [3, page 24] to get the complete NDS context. A single
encoded character could be split between two NDS Context Options.

The code for this option is 87. The maximum length for each instance
of this option is 255, but, as just described, the option may appear
more than once if the desired NDS context takes up more than 255
octets. Implementations are discouraged from enforcing any specific
maximum to the final concatenated NDS context.

Code Len Initial NDS Context
+----+----+----+----+----+----+--
| 87 | n | c1 | c2 | c3 | c4 | ...
+----+----+----+----+----+----+--

5. References

[1] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor
Extensions", RFC-2132, March 1997.

[2] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", RFC-2119, March 1997.

[3] Droms, R., "Dynamic Host Configuration Protocol", RFC-2131,
March 1997.

[4] Yergeau, F., "UTF-8, a transformation format of Unicode and
ISO 10646", RFC-2044, October 1996

6. Security Considerations

DHCP currently provides no authentication or security mechanisms.
Potential exposures to attack are discussed in section 7 of the DHCP
protocol specification [3]. In particular, these DHCP options allow
an unauthorized DHCP server to misdirect an NDS client to a
nonexistent NDS server or even a spoof NDS server. These threats are
similar to what NDS faces during normal operations in its native IPX
environment.

7. Author's Address

Don Provan
Novell, Inc.
2180 Fortune Drive
San Jose, California, 95131

Phone: +1 408 577 8440

EMail: donp@Novell.Com

8. Full Copyright Statement

Copyright (C) The Internet Society (1997). All Rights Reserved.

This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.

The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns.

This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

延伸阅读

文章来源于领测软件测试网 https://www.ltesting.net/


关于领测软件测试网 | 领测软件测试网合作伙伴 | 广告服务 | 投稿指南 | 联系我们 | 网站地图 | 友情链接
版权所有(C) 2003-2010 TestAge(领测软件测试网)|领测国际科技(北京)有限公司|软件测试工程师培训网 All Rights Reserved
北京市海淀区中关村南大街9号北京理工科技大厦1402室 京ICP备10010545号-5
技术支持和业务联系:info@testage.com.cn 电话:010-51297073

软件测试 | 领测国际ISTQBISTQB官网TMMiTMMi认证国际软件测试工程师认证领测软件测试网