• 软件测试技术
  • 软件测试博客
  • 软件测试视频
  • 开源软件测试技术
  • 软件测试论坛
  • 软件测试沙龙
  • 软件测试资料下载
  • 软件测试杂志
  • 软件测试人才招聘
    暂时没有公告

字号: | 推荐给好友 上一篇 | 下一篇

RFC34 - Some Brief Preliminary Notes on the Augmentation Research Center Clock

发布: 2007-6-23 14:09 | 作者:   | 来源:   | 查看: 12次 | 进入软件测试论坛讨论

领测软件测试网

   
  Network Working Group Bill English SRI/ARC
Request for Comments No. 34 26 February 1970

SOME BRIEF PRELIMINARY NOTES ON THE ARC CLOCK

The ARC clock system provides a time reference that is written into the

core memory of the XDS 940 Computer. There are two types of time
information available--absolute and relative.

The absolute time is written into two adjacent words of core with the
following format:

First word --

Bits 0 thru 7 contain the month code in straight binary with a
range of 1 to 12

Bits 8 thru 15 contain the day code in straight binary with a
range of 1 to 31

Bits 16 thru 23 contain the year code in straight binary with
range of 0 to 99

Second word --

Bits 00 thru 7 contain the hour code written in straight binary
with a range of 0 to 23

Bits 8 thru 15 contain the minute code written in straight binary
with a range of 0 to 60

Bits 16 thru 23 contain the second code written in straight binary
with range ofr 0 to 60

These 2 words are written once each second. It is anticipated that the
accuracy of the initial setting will be on the order of 1 second, as
referred to WWV, and that the oscillator drift rate will not account for
an accumlated error of more than 1 second every 250 days. The
oscillator and clock are provided with standby power in order to
maintain the accuracy of the system. Because of variable delays in time
required to obtain access to the 940 core memory, it is anticipated that
the short-term accuracy will be on the order of 10 to 20 microseconds.

The relative time, which is written into one word of core memory, is
simply the contents of a 24 bit binary accumulator. The rate at which
the accumulator is updated can be chosen to be either once very 100
micro seconds or once every millisecond. In either case the core

location is written each time the accumulator is updated. As above the
short-term accuracy will be about 10 to 20 microseconds and the long-
term accuracy will be the equivalent of one second every 250 days.

[ This RFCwas put into machine readable form for entry ]
[ into the online RFCarchives by Katsunori Tanaka 1/98 ]

文章来源于领测软件测试网 https://www.ltesting.net/


关于领测软件测试网 | 领测软件测试网合作伙伴 | 广告服务 | 投稿指南 | 联系我们 | 网站地图 | 友情链接
版权所有(C) 2003-2010 TestAge(领测软件测试网)|领测国际科技(北京)有限公司|软件测试工程师培训网 All Rights Reserved
北京市海淀区中关村南大街9号北京理工科技大厦1402室 京ICP备10010545号-5
技术支持和业务联系:info@testage.com.cn 电话:010-51297073

软件测试 | 领测国际ISTQBISTQB官网TMMiTMMi认证国际软件测试工程师认证领测软件测试网